manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

CHAPTER 13

 STATISTICS

This chapter describes statistics displayed by the 

graphical user interface

 (GUI). Statistics are available for access point and 

their managed devices.

A Smart RF statistical history is available to assess adjustments made to device configurations to compensate for detected 
coverage holes or device failures.

Statistics display detailed information about peers, health, device inventories, wireless clients associations, adopted AP 
information, rogue APs and WLANs. Access point statistics can be exclusively displayed to validate connected access points, 
their VLAN assignments and their current authentication and encryption schemes.

Wireless client statistics are available for an overview of client health. Wireless client statistics includes RF quality, traffic 
utilization and user details. Use this information to assess if configuration changes are required to improve network 
performance.

For more information, see:

•

System Statistics

•

RF Domain Statistics

•

Access Point Statistics

•

Wireless Client Statistics

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

Canon Vb-C60 - Ptz Network Camera Setup Manual preview
Vb-C60 - Ptz Network Camera
Brand: Canon Pages: 30
D-Link DSL-500 Command Reference Manual preview
DSL-500
Brand: D-Link Pages: 15
D-Link DWL-G550 Product Data Sheet preview
DWL-G550
Brand: D-Link Pages: 2
D-Link DSL-G2562DG Quick Start Manual preview
DSL-G2562DG
Brand: D-Link Pages: 2
XMG OASIS Disassembly Procedure preview
OASIS
Brand: XMG Pages: 5
Habitat M10 Installation Manual preview
M10
Brand: Habitat Pages: 48
NAD M10 Quick Setup Manual preview
M10
Brand: NAD Pages: 2
IBM 11a Quick Start Manual preview
11a
Brand: IBM Pages: 32
Magma PE6R4-I Quick Installation Manual preview
PE6R4-I
Brand: Magma Pages: 2
Magnadyne RV2458 User Manual preview
RV2458
Brand: Magnadyne Pages: 13
SIIG NN-EC2812-S1 Quick Installation Manual preview
NN-EC2812-S1
Brand: SIIG Pages: 12
Commell CMB-673 Installation Manual preview
CMB-673
Brand: Commell Pages: 9
Supermicro SAS-827HD User Manual preview
SAS-827HD
Brand: Supermicro Pages: 16
Allnet ALL1682504 Quick Installation preview
ALL1682504
Brand: Allnet Pages: 12
Telebyte 458-LM-E2-36 Quick Start Manual preview
458-LM-E2-36
Brand: Telebyte Pages: 19
IEI Technology PUZZLE-IN003B User Manual preview
PUZZLE-IN003B
Brand: IEI Technology Pages: 86
Dahua Technology Lite N42B1P Series Quick Start Manual preview
Lite N42B1P Series
Brand: Dahua Technology Pages: 14
Idis DR-1508P Operation Manual preview
DR-1508P
Brand: Idis Pages: 85

Brands by name

Popular brands

Load more brands