manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

Device Configuration 5 - 203

5.4.5.3 Profile Interface Override Configuration

Device Overrides

An access point requires its Virtual Interface be configured for layer 3 (IP) access or layer 3 service on a VLAN. A virtual interface 
defines which IP address is associated with each connected VLAN ID. 

An interface configuration can have overrides applied to customize the configuration to a unique deployment objective. For 
more information, refer to the following:

•

Ethernet Port Override Configuration

•

Virtual Interface Override Configuration

•

Port Channel Override Configuration

•

Radio Override Configuration

•

WAN Backhaul Overrides

•

PPPoE Configuration

5.4.5.3.1 Ethernet Port Override Configuration

Profile Interface Override Configuration

Use an Ethernet Port override to change (modify) parameters of an access point’s Ethernet Port configuration.

The following ports are available on supported access point models:

•

AP6511

 - fe1, fe2, fe3, fe4, up1

•

AP6521

 - GE1/POE (LAN)

•

AP6522/AP6522M

 - GE1/POE (LAN)

•

AP6532

 - GE1/POE (LAN)

•

AP6562 - 

GE1/POE (LAN)

•

AP7131

 - GE1/POE (LAN), GE2 (WAN) 

•

AP7161

 - GE1/POE (LAN), GE2 (WAN) 

•

AP7181

 - GE1/POE (LAN), GE2 (WAN) 

•

AP8132/AP8232

 - GE1/POE (LAN), GE2 (WAN) 

To define an Ethernet port configuration override:

1. Select the 

Configuration

 tab from the Web UI.

2. Select 

Devices 

from the 

Configuration

 tab.

3. Select 

Device Overrides

.

4. Select a target device from the device browser in the lower, left-hand, side of the UI.

5. Select 

Interface

 to expand its sub menu options.

6. Select

 Ethernet Ports

.

NOTE: 

A blue override icon (to the left of a parameter) defines the parameter as having 

an override applied. To remove an override, go to the 

Basic Configuration

 screen’s 

Device Overrides

 field and select 

Clear Overrides

. This will remove all overrides 

from the device.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

Makita RF1101 Parts Breakdown preview
RF1101
Brand: Makita Pages: 2
WAGO 852-1417 Operating And Assembly Instructions preview
852-1417
Brand: WAGO Pages: 2
Amplifier Tech ATP6700 Owner'S Manual preview
ATP6700
Brand: Amplifier Tech Pages: 36
H3C S12500R-2L Installation, Quick Start preview
S12500R-2L
Brand: H3C Pages: 26
Barco ImagePRO-HD Installation Manual preview
ImagePRO-HD
Brand: Barco Pages: 121
Taiwan Commate Computer Inc. S630MA Quick Installation preview
S630MA
Brand: Taiwan Commate Computer Inc. Pages: 29
Mastervolt MasterBus Tanklevel Interface User And Installation Manual preview
MasterBus Tanklevel Interface
Brand: Mastervolt Pages: 8
Zhone IMACS Network Device Product Manual preview
IMACS Network Device
Brand: Zhone Pages: 114
TRENDnet TE100-S16 - 10/100Mbps Ethernet Switch User Manual preview
TE100-S16 - 10/100Mbps Ethernet Switch
Brand: TRENDnet Pages: 15
EVOC 6336-STG-YX Manual preview
6336-STG-YX
Brand: EVOC Pages: 57
ACTi GNR-310 Quick Installation Manual preview
GNR-310
Brand: ACTi Pages: 12
X-Micro IEEE 802.11b User Manual preview
IEEE 802.11b
Brand: X-Micro Pages: 49
Airlink101 AR325W Quick Installation Manual preview
AR325W
Brand: Airlink101 Pages: 13
BHU NETWORKS BXM2 User Manual preview
BXM2
Brand: BHU NETWORKS Pages: 75
Renesas REJ06B0734-0100 Application Note preview
REJ06B0734-0100
Brand: Renesas Pages: 19
Comet Labs GS8+ User Manual preview
GS8+
Brand: Comet Labs Pages: 11
Acorn Computers Limited A300 Series Quick Start Manual preview
A300 Series
Brand: Acorn Computers Limited Pages: 2
ICP DAS USA I-87K Series User Manual preview
I-87K Series
Brand: ICP DAS USA Pages: 31

Brands by name

Popular brands

Load more brands