manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

Device Configuration 5 - 287

Figure 5-180

VPN Step-By-Step Wizard - Step 2

5. In 

Step 2

 screen, configure the following parameters:

Peer

Select the type of peer for this device when forming a tunnel. Peer information can be either 

IP Address

 or 

Host Name

. Provide the IP address or the hostname of the peer device.

Authentication

Configure how the devices authenticate with each other.

•

Certificate

 – The devices use certificates to validate credentials.

•

Pre-Shared Key

 – The devices use pre-shared key to authenticate.

Local Identity

Configure the local identity for the VPN Tunnel.

•

IP Address

 – The local identity is an IP address.

•

FQDN

 – The local identity is a 

Fully Qualified Domain Name

 (FQDN).

•

Email

 – The local identity is an E-mail address.

Remote Identity

Configure the remote identity for the VPN Tunnel.

•

IP Address

 – The remote identity is an IP address.

•

FQDN

 – The remote identity is a 

Fully Qualified Domain Name

 (FQDN).

•

Email

 – The remote identity is an E-mail address.

IKE Policy

Configure the IKE policy to use when creating this VPN Tunnel. The following options are 
available:

•

Use Default

 – Click this option to use the default IKE profiles. Select one of 

ike1-default

 or 

ike2-default

.

•

Create new Policy

 – Click this option to create a new IKE policy.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

ICP DAS USA ZT-2510 Series Quick Start Manual preview
ZT-2510 Series
Brand: ICP DAS USA Pages: 8
Observint NVR4 Firmware User Manual preview
NVR4
Brand: Observint Pages: 117
Lancom GS-2310P Instruction Manual preview
GS-2310P
Brand: Lancom Pages: 25
WaiLan DeltaFire 500 User Manual preview
DeltaFire 500
Brand: WaiLan Pages: 27
BSD Networks bsg-0800t User Manual preview
bsg-0800t
Brand: BSD Networks Pages: 7
TP-Link ER8411 Installation Manual preview
ER8411
Brand: TP-Link Pages: 2
B&B Electronics RS-232/422/485 Serial Card CE 3PXCC4A User Manual preview
RS-232/422/485 Serial Card CE 3PXCC4A
Brand: B&B Electronics Pages: 47
Intel 500 - DATASHEET REV 003 Datasheet preview
500 - DATASHEET REV 003
Brand: Intel Pages: 67
Commell FS-A79 User Manual preview
FS-A79
Brand: Commell Pages: 36
Accusys ACS-7630 User Manual preview
ACS-7630
Brand: Accusys Pages: 34
CAME 848EA-0120 Setup And User'S Manual preview
848EA-0120
Brand: CAME Pages: 32
Navitar 1-62643 Dimensional Drawing preview
1-62643
Brand: Navitar Pages: 1
Enterasys 2H258-17R Installation & User Manual preview
2H258-17R
Brand: Enterasys Pages: 62
Intel SRCU31L Quick Start Manual preview
SRCU31L
Brand: Intel Pages: 20
Paradyne Hotwire 8323 Installation Instructions Manual preview
Hotwire 8323
Brand: Paradyne Pages: 6
NetCommWireless NTC-220 Series Quick Start Manual preview
NTC-220 Series
Brand: NetCommWireless Pages: 28
Renesas RL78/L1C User Manual preview
RL78/L1C
Brand: Renesas Pages: 4
Lanpro LP-SW811 User Manual preview
LP-SW811
Brand: Lanpro Pages: 6

Brands by name

Popular brands

Load more brands