manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

Wireless Configuration 6 - 73

6.4 Association ACL

Wireless Configuration

An Association ACL is a policy-based 

Access Control List

 (ACL) that either prevents or allows wireless clients from connecting 

to a WLAN.

An Association ACL allows an administrator to grant or restrict client access by specifying a wireless client MAC address or 
range of MAC addresses to either include or exclude from connectivity.

Association ACLs are applied to WLANs as an additional access control mechanism. They can be applied to WLANs from within 
a WLAN Policy’s Advanced configuration screen. For more information on applying an existing Association ACL to a WLAN, see 

Configuring Advanced WLAN Settings on page 6-40

.

Each supported access point model can support up to 32 Association ACLs, with the exception of AP6511 and AP6521 models 
that support 16 WLAN Association ACLs.

To define an Association ACL deployable with a WLAN:

1. Select the 

Configuration

 tab from the Web UI.

2. Select 

Wireless.

3. Select 

Association ACL 

to display a high level display of existing Association ACL policies.

The 

Association Access Control List (ACL) 

screen lists existing Association ACL policies. Any of these policies can be 

selected and applied.

Figure 6-30

Association Access Control List (ACL) screen

4. Select 

Add

 to define a new ACL configuration, 

Edit

 to modify an existing ACL configuration or 

Delete

 to remove an existing 

one.

An 

Association ACL 

screen displays for defining a new ACL or modifying a selected ACL.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

GE D20MX User Manual preview
D20MX
Brand: GE Pages: 146
dbx 902 Manual preview
902
Brand: dbx Pages: 8
Panasonic MICROCOMPUTER MN103S Connection Diagrams preview
MICROCOMPUTER MN103S
Brand: Panasonic Pages: 5
Panasonic MICROCOMPUTER MN103S Application Note preview
MICROCOMPUTER MN103S
Brand: Panasonic Pages: 21
Panasonic FP2 Series Manual preview
FP2 Series
Brand: Panasonic Pages: 56
Panasonic FP2 Series Product Manual preview
FP2 Series
Brand: Panasonic Pages: 28
Panasonic KX-HTS Series Quick Start Manual preview
KX-HTS Series
Brand: Panasonic Pages: 2
Panasonic WJMPU955 - PROCESSING UNIT - TMU Operating Instructions Manual preview
WJMPU955 - PROCESSING UNIT - TMU
Brand: Panasonic Pages: 62
NAIM AV2 Update Instructions preview
AV2
Brand: NAIM Pages: 2
CAME QBEMFSB2 User Manual preview
QBEMFSB2
Brand: CAME Pages: 19
IBM AS/400 Hardware User Manual preview
AS/400
Brand: IBM Pages: 104
IBM System Storage TS3100 Setup, Operator, And Service Manual preview
System Storage TS3100
Brand: IBM Pages: 375
Fortinet FortiAP S311C Quick Start Manual preview
FortiAP S311C
Brand: Fortinet Pages: 20
Supermicro SAS-827HD User Manual preview
SAS-827HD
Brand: Supermicro Pages: 16
JETWAY LI1B Series User Manual preview
LI1B Series
Brand: JETWAY Pages: 55
Tbus NV-ER1816i Installation Manual preview
NV-ER1816i
Brand: Tbus Pages: 25
Faderfox 4midiloop User Manual preview
4midiloop
Brand: Faderfox Pages: 10
FONESTAR XO-324 Instruction Manual preview
XO-324
Brand: FONESTAR Pages: 8

Brands by name

Popular brands

Load more brands