manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

13 - 46  WiNG 5.5 Access Point System Reference Guide 

6. Review the 

Top 10 interference

 table to assess RF Domain member WLANs whose radios are contributing the highest 

levels of detected interference within the RF Domain.

7. Review the 

Top 5 Active Radios

 to assess the significance of any Smart RF initiated compensations versus their reported 

top performance.

8. Refer to the 

SMART RF Activity

 table to view the trending of Smart RF compensations.

WLAN Name

Lists the WLANs whose member device radios are contributing to the highest levels of 
interference detected within the RF Domain.

Radio Count

Displays the number of radios within each listed WLAN that are contributing to the RF 
Domain’s high levels of detected interference. These are the radios subject to Smart RF 
power compensations to reconcile the high levels of interference. 

Clients

Lists the number of connected clients detected for the WLAN member device radios. 

Radio MAC

Lists the hardware encoded MAC address of each listed top performing RF Domain 
member device radio.

RF Band

Displays the top performing radio’s operation band. This may help administrate whether 
more changes were required in the 2.4 GHz band then 5 GHz or vice versa.

AP Name

Lists the administrator assigned access point name used to differentiate from other RF 
Domain member access point radios.

Power Changes

Displays the number of Smart RF initiated power level changes reported for this top 
performing RF Domain member radio.

Channel Changes

Displays the number of Smart RF initiated channel changes reported for this top 
performing RF Domain member radio.

Coverage Changes

Displays the number of Smart RF initiated coverage changes reported for this top 
performing RF Domain member radio.

Time Period

Lists the frequency Smart RF activity is trended for the RF Domain. Trending periods 
include the

 Current Hour

, 

Last 24 Hours

 or the 

Last Seven Days

. Comparing Smart RF 

adjustments versus the last seven days enables an administrator to assess whether 
periods of interference and poor performance were relegated to just specific periods.

Power Changes

Displays the number of Smart RF initiated power level changes needed for RF Domain 
member devices during each of the three trending periods. Determine whether power 
compensations were relegated to known device outages or if compensations were 
consistent over the course of a day or week.

Channel Changes

Lists the number of Smart RF initiated channel changes needed for RF Domain member 
devices during each of the three trending periods. Determine if channel adjustments were 
relegated to known device count increases or decreases over the course of a day or week.

Coverage Changes

Displays the number of Smart RF initiated coverage changes needed for RF Domain 
member devices during each of the three trending periods. Determine if coverage changes 
were relegated to known device failures or known periods of interference over the course 
of a day or week.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

D-Link xStack Storage DSN-4000 Series Datasheet preview
xStack Storage DSN-4000 Series
Brand: D-Link Pages: 5
4IPNET WHG301 User Manual preview
WHG301
Brand: 4IPNET Pages: 97
4RF Aprisa LTE Quick Start Manual preview
Aprisa LTE
Brand: 4RF Pages: 7
Xinje XS Series User Manual preview
XS Series
Brand: Xinje Pages: 57
QTech QSR-3920 Series Configuration Manual preview
QSR-3920 Series
Brand: QTech Pages: 120
QSC DSP-30 Hardware Manual preview
DSP-30
Brand: QSC Pages: 28
Accom WSD/HDe Installation Procedure preview
WSD/HDe
Brand: Accom Pages: 15
Ubiquiti AmpliFi AFi-G Quick Start Manual preview
AmpliFi AFi-G
Brand: Ubiquiti Pages: 20
AMG Systems AMG9240-C User Manual preview
AMG9240-C
Brand: AMG Systems Pages: 2
Lindsay Broadband LBON320AC Series Installation And Operation Manual preview
LBON320AC Series
Brand: Lindsay Broadband Pages: 4
Maipu MP2900-04-AC Installation Manual preview
MP2900-04-AC
Brand: Maipu Pages: 80
ProCurve J8454A Quick Start Manual preview
J8454A
Brand: ProCurve Pages: 2
Airlink101 AWMB100 User Manual preview
AWMB100
Brand: Airlink101 Pages: 46
Acromag APCe7012E-LF User Manual preview
APCe7012E-LF
Brand: Acromag Pages: 23
Top RAMS1000 User Manual preview
RAMS1000
Brand: Top Pages: 21
Xtreme SNMP-1PMINI User & Installation Manual preview
SNMP-1PMINI
Brand: Xtreme Pages: 83
Vacron VDH-NK300 Hardware Manual preview
VDH-NK300
Brand: Vacron Pages: 16
Broadband Products D-Link DSL-2640U Quick Installation Manual preview
D-Link DSL-2640U
Brand: Broadband Products Pages: 12

Brands by name

Popular brands

Load more brands