manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

Device Configuration 5 - 135

5. Review the following Bridge NAT configurations to determine whether a new Bridge NAT configuration requires creation 

or an existing configuration modified or removed:

6. Select 

Add

 to create a new Bridge VLAN configuration, 

Edit

 to modify an existing configuration or 

Delete

 to remove a 

configuration.

Figure 5-84

Profile Security - Dynamic NAT screen

7. Select the 

ACL

 whose IP rules are to be applied to this policy based forwarding rule. A new ACL can be defined by selecting 

the 

Create

 icon, or an existing set of IP ACL rules can be modified by selecting the 

Edit

 icon.

8. Use the 

IP Address Range 

table to configure IP addresses and address ranges that can used to access the Internet.

9. Select 

+ Add Row

 to set the IP address range settings for the Bridge NAT configuration.

ACL

Lists the ACL applying IP address access/deny permission rules to the Bridge NAT configuration.

Interface

Lists the communication medium (outgoing layer 3 interface) between source and destination 
points. This is either the access point’s pppoe1 or wwan1 interface or the VLAN used as the 
redirection interface between the source and destination.

NAT Pool

Lists the names of existing NAT pools used with the Bridge NAT configuration. This displays only 
when Overload Type is NAT Pool.

Overload IP

Lists the address used globally and collectively for numerous local addresses.

Overload Type

Lists the overload type used with the listed IP ACL rule. Set as either 

NAT Pool

, 

One Global 

Address

 or 

Interface IP Address

.

Interface

Lists the outgoing layer 3 interface on which traffic is re-directed. The interface can be an 
access point WWAN or PPPoE interface. Traffic can also be redirected to a designated 
VLAN.

NAT Pool

Displays the NAT pool used by this Bridge NAT entry. A value is only displayed only when 
Overload Type has been set to NAT Pool.

Overload IP

Lists whether a single global address collectively supports numerous local addresses.

Overload Type

Displays the override type for this policy based forwarding rule.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

Patton electronics 2888 Getting Started Manual preview
2888
Brand: Patton electronics Pages: 51
Keithley 7707 User Manual preview
7707
Brand: Keithley Pages: 59
Commell LS-570 User Manual preview
LS-570
Brand: Commell Pages: 58
Hawking CF100W Specifications preview
CF100W
Brand: Hawking Pages: 2
STONEFLY DR365V-2404 Setup Manual preview
DR365V-2404
Brand: STONEFLY Pages: 48
MiLAN E-MCC-1600 Install Manual preview
E-MCC-1600
Brand: MiLAN Pages: 1
Symantec PacketShaper PS-S200 Quick Start Manual preview
PacketShaper PS-S200
Brand: Symantec Pages: 2
C-Data CR200-1432R-B User Manual preview
CR200-1432R-B
Brand: C-Data Pages: 26
NETGEAR FS605 v3 Installation Manual preview
FS605 v3
Brand: NETGEAR Pages: 84
Extron electronics PoleVault System A/V Source Inputs Specification Sheet preview
PoleVault System A/V Source Inputs
Brand: Extron electronics Pages: 4
C&H Active Module Carrier VX402C-64 User Manual preview
Active Module Carrier VX402C-64
Brand: C&H Pages: 32
Adaptec AAA-130SA SERIES Installation And Hardware Manual preview
AAA-130SA SERIES
Brand: Adaptec Pages: 94
Patton electronics Model 2711 User Manual preview
Model 2711
Brand: Patton electronics Pages: 13
Angel Cool Aironet 1200 Quick Start Manual preview
Aironet 1200
Brand: Angel Cool Pages: 2
Isee IGEPv2 BOARD Hardware Reference Manual preview
IGEPv2 BOARD
Brand: Isee Pages: 68
S&T TPMS1209T02-ER User Manual preview
TPMS1209T02-ER
Brand: S&T Pages: 28
US Robotics uShare USR8710 User Manual preview
uShare USR8710
Brand: US Robotics Pages: 180
ADTRAN 1700600L2 Quick Start preview
1700600L2
Brand: ADTRAN Pages: 4

Brands by name

Popular brands

Load more brands