manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

Device Configuration 5 - 327

• Use 

Opportunistic

 as the rate selection settings for the AP7161 radio The default is 

Standard

. For more information on 

defining this settings, see 

Radio Override Configuration

.

• Disable 

Dynamic Chain Selection

 (radio setting). The default value is enabled. This setting is disabled from the 

Command 

Line Interface

 (CLI) using the 

dynamic-chain-selection

 command, or, in the UI (refer 

Radio Override Configuration

.

• Disable A-MPDU Aggregation if the intended vehicular speed is greater than 30 mph. For more information, see 

Radio 

Override Configuration

.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

D-Link Air DCS-1000W Setting-Up Manual preview
Air DCS-1000W
Brand: D-Link Pages: 13
D-Link DSL-2730B Technical Support preview
DSL-2730B
Brand: D-Link Pages: 5
D-Link GO-SW-5E Quick Install Manual preview
GO-SW-5E
Brand: D-Link Pages: 2
GE MDS SD Series Setup Manual preview
MDS SD Series
Brand: GE Pages: 4
Lauterbach C2000 Manual preview
C2000
Brand: Lauterbach Pages: 61
Accuphase AD-60 Instruction Manual preview
AD-60
Brand: Accuphase Pages: 2
ADTRAN ATLAS 550 Manual preview
ATLAS 550
Brand: ADTRAN Pages: 2
Acrosser Technology AMB-VDX3H1 Series Quick Start Manual preview
AMB-VDX3H1 Series
Brand: Acrosser Technology Pages: 4
D-Link AirPlus XtremeG Ethernet-to-Wireless Bridge... Manual preview
AirPlus XtremeG Ethernet-to-Wireless Bridge...
Brand: D-Link Pages: 31
LORD AP5103 Series Technical Manual preview
AP5103 Series
Brand: LORD Pages: 9
Aleratec 310108 Quick Start Manual preview
310108
Brand: Aleratec Pages: 12
Moxa Technologies ICS-G7748A Series Quick Installation Manual preview
ICS-G7748A Series
Brand: Moxa Technologies Pages: 10
Zonet ZUN2200 Quick Installation Manual preview
ZUN2200
Brand: Zonet Pages: 2
BSD Networks bsg-0800t User Manual preview
bsg-0800t
Brand: BSD Networks Pages: 7
Cytron Technologies SHIELD-2AMOTOR User Manual preview
SHIELD-2AMOTOR
Brand: Cytron Technologies Pages: 13
Glacier G2080TiFE Installation Manual preview
G2080TiFE
Brand: Glacier Pages: 2
Caton NVE 9100 User Manual preview
NVE 9100
Brand: Caton Pages: 18
LaCie FireWire 800 ExpressCard 34 Quick Install Manual preview
FireWire 800 ExpressCard 34
Brand: LaCie Pages: 24

Brands by name

Popular brands

Load more brands