manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

5 - 118 WiNG 5.5 Access Point System Reference Guide 

31. Refer to the 

Wins Server Settings

 field and specify primary and secondary server resources for validating RADIUS 

authentication requests on behalf of a remote VPN client. These external WINS server resources are available to validate 
RADIUS resource requests.

32. Refer to the 

Name Server Settings

 field and specify primary and secondary server resources for validating RADIUS 

authentication requests on behalf of a remote VPN client. These external name server resources are available to validate 
RADIUS resource requests.

33. Select the 

IP Local Pool 

option to define an IP address and mask for a virtual IP pool used to IP addresses to remote VPN 

clients.

34. If using IKEv2 specify following additional settings (required for IKEv2 only):

35. Select 

OK

 to save the updates made to the 

Remote VPN Server

 screen. Selecting 

Reset

 reverts the screen to its last 

saved configuration.

36. Select the 

Remote VPN Client

 tab.

The 

Remote VPN Client

 screen provides options for configuring the remote VPN client.

AAA Policy

Select the AAA policy used with the remote VPN client. AAA policies define RADIUS 
authentication and accounting parameters. The access point can optionally use AAA 
server resources (when using RADIUS as the authentication method) to provide user 
database information and user authentication data.

DHCP Server Type

Specify whether the 

Dynamic Host Configuration Protocol

 (DHCP) server is specified as 

an 

IP address

, 

Hostname (FQDN)

 or 

None

 (a different classification will be defined). 

DHCP allows hosts on an IP network to request and be assigned IP addresses as well 
as discover information about the network where they reside.

DHCP Server

Depending on the DHCP server type selected, enter either the numerical IP address, 
hostname or other (if None is selected as the server type).

IP Local Pool

Select this option to define an IP address and mask for a virtual IP pool used to IP 
addresses to remote VPN clients.

Relay Agent IP Address

Select this option to define DHCP relay agent IP address.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

H3C MSR 20-20 Supplementary Manual preview
MSR 20-20
Brand: H3C Pages: 6
3Com OfficeConnect 3CP4144 How To Set Up preview
OfficeConnect 3CP4144
Brand: 3Com Pages: 4
3Com OfficeConnect 3CP4144 Release Note preview
OfficeConnect 3CP4144
Brand: 3Com Pages: 2
H3C MSR 20-20 User Manual preview
MSR 20-20
Brand: H3C Pages: 60
H3C MSR 20 Series Manual preview
MSR 20 Series
Brand: H3C Pages: 149
3Com 3C13636 Installation Manual preview
3C13636
Brand: 3Com Pages: 27
Dave Embedded Systems ARM Cortex-A9 MPCore Quick Start Manual preview
ARM Cortex-A9 MPCore
Brand: Dave Embedded Systems Pages: 67
Paradyne Hotwire 5446 Notice preview
Hotwire 5446
Brand: Paradyne Pages: 2
Paradyne Hotwire 6381 Installation Instructions Manual preview
Hotwire 6381
Brand: Paradyne Pages: 20
Paradyne Hotwire 6381 Upgrade Instructions preview
Hotwire 6381
Brand: Paradyne Pages: 2
Zhone Hotwire 6381 Quick Installation Instructions preview
Hotwire 6381
Brand: Zhone Pages: 2
Conceptronic C150BRS4 Multi Language Quick Manual preview
C150BRS4
Brand: Conceptronic Pages: 2
Stanwax Laser S4i Manual preview
S4i
Brand: Stanwax Laser Pages: 9
Radicom WiFiHU2S-a/c Preliminary Designer’S Manual preview
WiFiHU2S-a/c
Brand: Radicom Pages: 27
Selta Alyseo 106 User Manual preview
Alyseo 106
Brand: Selta Pages: 83
QNAP Turbo NAS TVS-71 Series Hardware User Manual preview
Turbo NAS TVS-71 Series
Brand: QNAP Pages: 51
Longshine LCS-8170 User Manual preview
LCS-8170
Brand: Longshine Pages: 35
SafeHome NVR903 Manual preview
NVR903
Brand: SafeHome Pages: 24

Brands by name

Popular brands

Load more brands