manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

5 - 68 WiNG 5.5 Access Point System Reference Guide 

19. Select 

Add

 to create a new manual session, 

Edit

 to modify an existing session configuration or 

Delete

 to remove a 

selected manual session.

Figure 5-37

Network - L2TPv3 screen, Add T2TP Peer Configuration

20. Set the following session parameters:

Local Session ID

Displays the numeric identifier assigned to each listed tunnel session. This is the 
pseudowire ID for the session. This pseudowire ID is sent in a session establishment 
message to the L2TP peer. 

MTU

Displays each sessions’s 

maximum transmission unit

 (MTU). The MTU is the size (in bytes) 

of the largest protocol data unit the layer can pass between tunnel peers in this session. 
A larger MTU means processing fewer packets for the same amount of data.

Name

Lists the name assigned to each listed manual session.

Remote Session ID

Lists the remote session ID passed in the establishment of the tunnel session.

Name

Define a 31 character maximum name for this tunnel session. Each session name 
represents a single data stream. 

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

Rabbit 2000 Designers Handbook preview
2000
Brand: Rabbit Pages: 45
Rabbit 2000 Instruction & Reference Manual preview
2000
Brand: Rabbit Pages: 174
Rabbit 2000 Getting Started preview
2000
Brand: Rabbit Pages: 43
Dave Embedded Systems ARM Cortex-A9 MPCore Quick Start Manual preview
ARM Cortex-A9 MPCore
Brand: Dave Embedded Systems Pages: 67
Ubiquiti Bullet Quick Start Manual preview
Bullet
Brand: Ubiquiti Pages: 40
Ubiquiti ER-4 Quick Start Manuals preview
ER-4
Brand: Ubiquiti Pages: 22
Ublox NEO-D9S Quick Start Manual preview
NEO-D9S
Brand: Ublox Pages: 17
ZyXEL Communications P-974H - V3.70 Manual preview
P-974H - V3.70
Brand: ZyXEL Communications Pages: 116
S&T kontron COMe-cEL6 User Manual preview
kontron COMe-cEL6
Brand: S&T Pages: 99
Datasat DDR-16 AES67 Installation And Operating Manual preview
DDR-16 AES67
Brand: Datasat Pages: 24
East Coast Datacom PDS-1/10G User Manual preview
PDS-1/10G
Brand: East Coast Datacom Pages: 19
Lattice Semiconductor sysCLOCK ECP5 Usage Manual preview
sysCLOCK ECP5
Brand: Lattice Semiconductor Pages: 43
Paradyne ACCULINK 3161 CSU Quick Reference Manual preview
ACCULINK 3161 CSU
Brand: Paradyne Pages: 19
SriHome NVS001B Quick Operation Manual preview
NVS001B
Brand: SriHome Pages: 12
Ampro Corporation LITTLE BOARD P5X Hardware User Manual preview
LITTLE BOARD P5X
Brand: Ampro Corporation Pages: 121
Planet IPOE-171-60W User Manual preview
IPOE-171-60W
Brand: Planet Pages: 20
IBM 7311-D11 Removal And Replacement Procedures preview
7311-D11
Brand: IBM Pages: 74
C&H Technologies EM405-8 User Manual preview
EM405-8
Brand: C&H Technologies Pages: 50

Brands by name

Popular brands

Load more brands