manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

Quick Start 3 - 13

3.1.1.5 WAN Configuration

Typical Setup Wizard

Use the

 WAN Setting

 screen to define network address settings for the WAN interface. The WAN interface connects the 

access point to a wired local area network or backhaul.

Figure 3-8

Initial Setup Wizard - WAN Configuration screen of the Typical Setup Wizard

1. Set the following WAN parameters:

•

Use DHCP

 - Select the radio control to enable an automatic network address configuration using external DHCP servers. 

An automatic IP address is configured to the access point’s WAN port using DHCP servers located on the WAN side of 
the network.

•

Static IP Address/Subnet

 - Enter an IP Address and a subnet for the access point's WAN interface. If 

Use DHCP

 is 

selected, this field is not available. When selecting this option, define 

Default Gateway

 information, as the field will 

become enabled on the bottom portion of the screen. The provided IP address is assigned to the WAN interface of the 
access point. The 

Default Gateway

 is a router that serves as a access to other networks.

•

Select the port that is connected to the WAN

 – Select the port connected to the WAN.

NOTE: 

This option is only available when 

Router Mode

 is selected in the 

Network 

Topology

 screen

.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

Billion BiPAC 4500NZ(L) User Manual preview
BiPAC 4500NZ(L)
Brand: Billion Pages: 146
H3C RA100 Installation Manual preview
RA100
Brand: H3C Pages: 34
Paradyne COMSPHERE 3800 Series Release Note preview
COMSPHERE 3800 Series
Brand: Paradyne Pages: 88
Paradyne COMSPHERE 3800PLUS Supplementary Manual preview
COMSPHERE 3800PLUS
Brand: Paradyne Pages: 5
Paradyne Hotwire 6212 Quick Installation Instructions preview
Hotwire 6212
Brand: Paradyne Pages: 2
Ubiquiti airFiber AF-5X User Manual preview
airFiber AF-5X
Brand: Ubiquiti Pages: 50
IEI Technology HPE-4S1 Quick Installation Manual preview
HPE-4S1
Brand: IEI Technology Pages: 3
Freescale Semiconductor FRDM-STBC-SA9500 Quick Reference Card preview
FRDM-STBC-SA9500
Brand: Freescale Semiconductor Pages: 2
dixell XT120C Installing And Operating Insructions preview
XT120C
Brand: dixell Pages: 4
ZyXEL Communications P-336M Specifications preview
P-336M
Brand: ZyXEL Communications Pages: 2
Omega Engineering OME-A8111 Hardware Manual preview
OME-A8111
Brand: Omega Engineering Pages: 34
VCS VideoJet 100 Manual preview
VideoJet 100
Brand: VCS Pages: 118
C-Com IPAM-1600s Series User Manual preview
IPAM-1600s Series
Brand: C-Com Pages: 148
AYRSTONE AyrMesh IndoorAP Instructions preview
AyrMesh IndoorAP
Brand: AYRSTONE Pages: 2
Patton electronics IPLink 2802 Specifications preview
IPLink 2802
Brand: Patton electronics Pages: 2
Lanner NCA-1525 User Manual preview
NCA-1525
Brand: Lanner Pages: 78
Z3 Technology SBE264-10-RPS User Instructions preview
SBE264-10-RPS
Brand: Z3 Technology Pages: 87
IBASE Technology FWA8207 Series User Manual preview
FWA8207 Series
Brand: IBASE Technology Pages: 39

Brands by name

Popular brands

Load more brands