manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

5 - 162 WiNG 5.5 Access Point System Reference Guide 

4. Select the 

Balance Band Loads by Ratio 

radio button

 

to balance the radio load, by assigning a ratio to both the 2.4 and 

5GHz bands. Balancing radio load by band ratio allows an administrator to assign a greater weight to radio traffic on either 
the 2.4 or 5.0 GHz band. This setting is enabled by default.

5. Set the following 

Channel Load Balancing 

settings:

6. Select the 

Balance AP Loads

 radio button to distribute this access point’s radio load amongst other access point radios. 

This setting is disabled by default, keeping the load on this access point radio.

7. Set the following 

Band Control 

values within the 

Advanced Parameters 

field.

Use notifications from 
roamed clients

Select this option to use roamed client notifications in the neighbor selection process. 
This feature is enabled by default, allowing access points in the neighbor selection 
process to consider device roaming counts as selection criteria.

Use smart-rf neighbor 
detection

Select this option to use SMART RF access point transmission adjustments as criteria 
in the neighbor selection process. This feature is enabled by default.

Balance 2.4GHz Channel 
Loads

Select this option to balance loads across channels in the 2.4 GHz radio band. This can 
prevent congestion on the 2.4 GHz radio if a channel is over utilized. This setting is 
enabled by default. Selecting this feature enables parameters within the 

Channel 

Load Balancing

 field for assigning weightage and throughput values.

Balance 5GHz Channel 
Loads

Select this option to balance loads across channels in the 5.0 GHz radio band. This can 
prevent congestion on the 5.0 GHz radio if a channel is over utilized. This setting is 
enabled by default. Selecting this feature enables parameters within the 

Channel 

Load Balancing

 field for assigning weightage and throughput values.

Max. Band Load Difference 
Considered Equal

Use the spinner control to set a value (from 0 - 100%) considered an adequate 
discrepancy (or deviation) when comparing 2.4 and 5GHz radio band load balances. 
The default setting is 1%. Thus, using a default setting of 10% means 10% is 
considered inconsequential when comparing 2.4 and 5.0 GHz load balances on this 
access point. This setting is not available if the 

Steering Strategy

 has been set to 

Disable

.

Band Ratio (2.4GHz)

Use the spinner control to set a loading ratio (from 0 - 10) the access point 2.4 GHz 
radio uses in respect to radio traffic load on the 2.4 GHz band. This allows an 
administrator to weight the traffic load if wishing to prioritize client traffic on the 2.4 
GHz radio band. The higher the value set, the greater the weight assigned to radio 
traffic load on the 2.4 GHz radio band. The default setting is 1. This setting is enabled 
only when 

Steer by ratio

 is selected as the steering strategy.

Band Ratio (5GHz)

Use the spinner control to set a loading ratio (from 0 - 10) the access point 
5.0 GHz radio uses in respect to radio traffic on the 5.0 GHz band. This allows an 
administrator to weight client traffic if wishing to prioritize client traffic on the 5.0 GHz 
radio band. The higher the value set, the greater the weight assigned to radio traffic 
load on the 5.0 GHz radio band. The default setting is 1. This setting is enabled only 
when 

Steer by ratio

 is selected as the steering strategy.

5 GHz load at which both 
bands enabled

When the 

Steering Strategy

 is set to Steer at 5.0 GHz, use the spinner control to set 

a value (from 0 - 100%) at which the load on the 2.4 GHz radio is equally preferred to 
this 5.0 GHz radio load. The default is 10%.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

ZETR 25 Installation Manual preview
25
Brand: ZETR Pages: 2
CallDirect CD Series At Command Manual preview
CD Series
Brand: CallDirect Pages: 33
Panasonic KX-UDS124 Maintenance Tool Manual preview
KX-UDS124
Brand: Panasonic Pages: 24
Panasonic i-Pro WV-SP302 Speci?Cations preview
i-Pro WV-SP302
Brand: Panasonic Pages: 2
Panasonic BB-HCM381A - Network Camera Troubleshooting Manual preview
BB-HCM381A - Network Camera
Brand: Panasonic Pages: 28
Panasonic BB-HCM381A - Network Camera Installation Manual preview
BB-HCM381A - Network Camera
Brand: Panasonic Pages: 2
Xinje XG Series User Manual preview
XG Series
Brand: Xinje Pages: 76
NEC N8141-75F Startup Manual preview
N8141-75F
Brand: NEC Pages: 6
Tripp Lite N48M Series Installation Manual preview
N48M Series
Brand: Tripp Lite Pages: 20
Paradyne 7995-A2-374 Quick Installation Instructions preview
7995-A2-374
Brand: Paradyne Pages: 1
NETGEAR DG834GT - 108 Mbps Super G Wireless ADSL Router Specifications preview
DG834GT - 108 Mbps Super G Wireless ADSL Router
Brand: NETGEAR Pages: 2
Acces I/O products MPCIE-ICM232-2 Hardware Manual preview
MPCIE-ICM232-2
Brand: Acces I/O products Pages: 5
Enertronica Santerno SINUS H PROFInet User Manual preview
SINUS H PROFInet
Brand: Enertronica Santerno Pages: 34
Jøtul ERS 01 Operation And Maintenance Manual preview
ERS 01
Brand: Jøtul Pages: 20
ADS Technologies PTV-352-EFG Hardware Quickmanual preview
PTV-352-EFG
Brand: ADS Technologies Pages: 1
Enterasys Enterasys Matrix 2G4082-25 Hardware Installation Manual preview
Enterasys Matrix 2G4082-25
Brand: Enterasys Pages: 58
Supersonic Franky Instruction Manual preview
Franky
Brand: Supersonic Pages: 46
Intel BLKDP45SG - MB 1333FSB DDR3 1333 Aud+Lan RAID SATA ATX Product Manual preview
BLKDP45SG - MB 1333FSB DDR3 1333 Aud+Lan RAID SATA ATX
Brand: Intel Pages: 86

Brands by name

Popular brands

Load more brands