Motorola AP-7131 Series Reference Manual Download Page 710

Page: 710 / 954

12 - 28 WiNG 5.5 Access Point System Reference Guide

Protocol

Advanced

is selected, choose the protocol for file management. Available options

include:

• tftp

• ftp

• sftp

• http

• cf

• usb1

• usb2

• usb3

• usb4

This parameter is required only when

Server

is selected as the

Source

and

Advanced

is selected.

Port

Advanced

is selected, specify the port for transferring files. This option is not

available for

usb1

usb2, usb3

and

usb4

. Enter the port number directly or use the

spinner control.

This parameter is required only when

Server

is selected as the

Source

IP Address

Advanced

is selected, specify the IP address of the server used to transfer files.

This option is not valid for

usb1

usb2, usb3

and

usb4

. If IP address of the server

is provided, a

Hostname

is not required.

This parameter is required only when

Server

is selected as the

Source

Hostname

If needed, specify a Hostname of the server transferring the file. This option is not
valid for

usb1

usb2, usb3

and

usb4

. If a hostname is provided, an

IP Address

not needed.

This field is only available when

Server

is selected in the

From

field.

Path/File

Advanced

is selected, define the path to the file on the server. Enter the complete

relative path to the file.

This parameter is required only when

Server

is selected as the

Source

User Name

Advanced

is selected, provide a user name to access a FTP or SFTP server.

This parameter is required only when

Server

is selected as the

Source

, and the

selected protocol is

ftp

sftp

Password

Advanced

is selected, provide a password to access the FTP or SFTP server.

This parameter is required only when

Server

is selected as the

Source

, and the

selected protocol is

ftp

sftp

Target

Advanced

is selected, set the target destination to transfer the file using FTP or

SFTP.

• Select

Server

if the destination is a remote server, then provide a URL to the

location of the server resource or select

Advanced

and provide the same network

address information described above.

• Select

Access Point

if the destination is an access point.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AP-7131 Series

Reviews:

Related manuals for AP-7131 Series

Brands by name

Popular brands

Motorola AP-7131 Series, Reference Manual

Search results

Summary of Contents for AP-7131 Series

Reviews:

Related manuals for AP-7131 Series

Brands by name

Popular brands