manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

6 - 80 WiNG 5.5 Access Point System Reference Guide 

Figure 6-34

SMART RF - Scanning Configuration screen

15. Enable or disable 

Smart Monitoring Enable

 by selecting the option. The feature is enabled by default.

When enabled, detector radios monitor their coverage areas for potential failed peers or coverage area holes requiring 
transmission adjustments for coverage compensation.

16. Select this option and specify a threshold number between 10 and 10,000. When this threshold is reached, awareness 

settings will be overridden with the values specified.

17. Select an index value from 1-3 for awareness overrides. The overrides are executed based on index as defined in the table, 

with the lowest index being executed first.

NOTE: 

The monitoring and scanning parameters within the Scanning Configuration 

screen are only enabled when 

Custom

 is selected as the Sensitivity setting from the 

Basic Configuration screen.

Day

Use the drop-down menu to select a day of the week to apply the override. Selecting 

All

 

will apply the policy every day. Selecting 

weekends

 will apply the policy on Saturdays and 

Sundays only. Selecting 

weekdays

 will apply the policy on Monday, Tuesday, Wednesday, 

Thursday and Friday. Selecting individual days of the week will apply the policy only on 
the selected day.

Start Time

This value sets the starting time of day(s) that the overrides will be activated. Use the 
spinner controls to select the hour and minute, in 12h time format. Then use the radio 
button to choose 

AM

 or 

PM

.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

D-Link DES-1228/ME User Manual preview
DES-1228/ME
Brand: D-Link Pages: 267
D-Link Verizon DSL-2750B Connection Instructions preview
Verizon DSL-2750B
Brand: D-Link Pages: 2
D-Link DVA-2800 Quick Start Manual preview
DVA-2800
Brand: D-Link Pages: 4
Sagem 2604 Quick Installation Manual preview
2604
Brand: Sagem Pages: 19
NEC N8104-213 Installation Manual preview
N8104-213
Brand: NEC Pages: 10
NEC N8104-213 Instructions Manual preview
N8104-213
Brand: NEC Pages: 8
Panasonic BL-C20 Troubleshooting Manual preview
BL-C20
Brand: Panasonic Pages: 18
Commell LS-570 User Manual preview
LS-570
Brand: Commell Pages: 58
Lindy 25046 User Manual preview
25046
Brand: Lindy Pages: 4
ETAS FETK-S2.1 User Manual preview
FETK-S2.1
Brand: ETAS Pages: 69
EK-Quantum Kinetic FLT 80 D5/DDC Body User Manual preview
Kinetic FLT 80 D5/DDC Body
Brand: EK-Quantum Pages: 16
FONESTAR XO-324 Instruction Manual preview
XO-324
Brand: FONESTAR Pages: 8
Ubiquiti AmpliFi AFi-G Quick Start Manual preview
AmpliFi AFi-G
Brand: Ubiquiti Pages: 20
AMG Systems AMG9240-C User Manual preview
AMG9240-C
Brand: AMG Systems Pages: 2
ZALMAN CNPS12X User Manual preview
CNPS12X
Brand: ZALMAN Pages: 11
Kramer RK-10MT Quick Start Manual preview
RK-10MT
Brand: Kramer Pages: 2
Lantronix WP2002000-01 User Manual preview
WP2002000-01
Brand: Lantronix Pages: 75
Hanwha Techwin Wisenet XRN-6410RB2-24TB User Manual preview
Wisenet XRN-6410RB2-24TB
Brand: Hanwha Techwin Pages: 124

Brands by name

Popular brands

Load more brands