manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

9 - 10 WiNG 5.5 Access Point System Reference Guide 

Figure 9-4

Captive Portal Policy screen - Web Page tab

The 

Login

 screen prompts for a username and password to access the captive portal and proceed to either the Terms and 

Conditions page (if used) or the Welcome page. The 

Terms and Conditions 

page provides conditions that must be agreed to 

before wireless client guest access is provided for the captive portal policy. The 

Welcome

 page asserts a user has logged 

in successfully and can access the captive portal. The 

Fail

 page asserts the authentication attempt has failed, and the user 

is not allowed access (using this captive portal policy) and must provide the correct login information again to access the 
Internet. The 

No Service

 page asserts that the captive portal service is temporarily unavailable due to technical reasons. 

Once the services become available, the captive portal user is automatically re-connected to the portal.

17. Provide the following required information when creating 

Login, Terms and Conditions, Welcome

 

and

 Fail

 pages 

maintained internally:

Organization’s Name

If the captive portal is defined on behalf of an organization, that name can be associated 
as sponsoring the captive portal.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

National Instruments NI 9213 Getting Started preview
NI 9213
Brand: National Instruments Pages: 11
PaloAlto Networks PA-5400 Series Quick Start Manual preview
PA-5400 Series
Brand: PaloAlto Networks Pages: 2
FS FS-BOX-V3 Quick Start Manual preview
FS-BOX-V3
Brand: FS Pages: 19
Cypress Semiconductor CY62148E Specification Sheet preview
CY62148E
Brand: Cypress Semiconductor Pages: 10
SMC Networks Barricade SMC7901WBRA2 Installation Manual preview
Barricade SMC7901WBRA2
Brand: SMC Networks Pages: 2
ZALMAN ZM-WB2 Gold User Manual preview
ZM-WB2 Gold
Brand: ZALMAN Pages: 9
ebm-papst R3G560-AH02-03 Operating Instructions Manual preview
R3G560-AH02-03
Brand: ebm-papst Pages: 13
Gtran Wireless DotSurfer GPC-2100 User Manual preview
DotSurfer GPC-2100
Brand: Gtran Wireless Pages: 44
Pullnet AGENT-2 S41D Line User Manual preview
AGENT-2 S41D Line
Brand: Pullnet Pages: 89
ST STM32L4P5AG User Manual preview
STM32L4P5AG
Brand: ST Pages: 37
Aerotech QNP3 Series Hardware Manual preview
QNP3 Series
Brand: Aerotech Pages: 62
ADTRAN 1200127L1 User Manual preview
1200127L1
Brand: ADTRAN Pages: 20
Hameg HM6050-2K Manual preview
HM6050-2K
Brand: Hameg Pages: 46
ZALMAN CNPS7000B Series User Manual preview
CNPS7000B Series
Brand: ZALMAN Pages: 9
Tripp Lite N304-025 Specification Sheet preview
N304-025
Brand: Tripp Lite Pages: 2
Cambium Networks ePMP Elevate Quick Start Manual preview
ePMP Elevate
Brand: Cambium Networks Pages: 7
Lenze MC-PBM Operating Instructions Manual preview
MC-PBM
Brand: Lenze Pages: 46
Billion BiPAC 7402 R3 User Manual preview
BiPAC 7402 R3
Brand: Billion Pages: 127

Brands by name

Popular brands

Load more brands