manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

Statistics    13  -  117

13.3.23.3 IP Firewall Rules 

Firewall

Create firewall rules to let any computer to send traffic to, or receive traffic from, programs, system services, computers or 
users. Firewall rules can be created to take one of the three actions listed below that match the rule’s criteria: 

• Allow a connection

• Allow a connection only if it is secured through the use of Internet Protocol security

• Block a connection

Rules can be created for either inbound or outbound traffic. To view the IP firewall rules:

1. Select the 

Statistics

 menu from the Web UI.

2. Select 

System 

from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its 

connected access points.

3. Select 

F

irewall 

and expand the menu to reveal its sub menu items

.

4. Select 

IP Firewall Rules

.

Figure 13-76

Access Point - Firewall IP Firewall Rules screen

The 

IP Firewall Rules

 

screen displays the following:

Precedence

Displays the precedence value applied to packets. The rules within an 

Access Control Entries

 

(ACL) list are based on precedence values. Every rule has a unique precedence value between 
1 and 5000. You cannot add two rules with the same precedence.

Friendly String

The friendly string provides information as to which firewall the rules apply. 

Hit Count

Displays the number of times each firewall rule has been triggered.

Refresh

Select the 

Refresh

 

button to update the screen’s statistics counters to their latest values.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

IBM System x3630 M4 Manual preview
System x3630 M4
Brand: IBM Pages: 7
IBM LS42 - BladeCenter - 7902 Installation Manual preview
LS42 - BladeCenter - 7902
Brand: IBM Pages: 56
IBM ATA 133 Quick Hardware Setup Manual preview
ATA 133
Brand: IBM Pages: 2
IBM BladeCenter Management Module User Manual preview
BladeCenter Management Module
Brand: IBM Pages: 78
IBM 9040-MR9 Manual preview
9040-MR9
Brand: IBM Pages: 110
IBM Remote Supervisor Adapter II User Manual preview
Remote Supervisor Adapter II
Brand: IBM Pages: 132
Parkside POF 1200 A1 Operation Manual preview
POF 1200 A1
Brand: Parkside Pages: 55
Parkside POF 1200 A1 Operation And Safety Notes preview
POF 1200 A1
Brand: Parkside Pages: 34
RadiSys EPC-31 Hardware Reference Manual preview
EPC-31
Brand: RadiSys Pages: 44
STONEFLY DR365V-2404 Setup Manual preview
DR365V-2404
Brand: STONEFLY Pages: 48
Lancom 7100 VPN Manual preview
7100 VPN
Brand: Lancom Pages: 70
Patton electronics SMARTNODE 4950 Quick Start Manual preview
SMARTNODE 4950
Brand: Patton electronics Pages: 12
Longshine LCS-8131G3 User Manual preview
LCS-8131G3
Brand: Longshine Pages: 27
Qlogic Storage Networking (Unified Fabric Pilot) Installation Manual preview
Storage Networking (Unified Fabric Pilot)
Brand: Qlogic Pages: 76
NKE BOX Wi-Fi User Manual And Installation Manual preview
BOX Wi-Fi
Brand: NKE Pages: 15
Galaxy Hunter Series Quick Start Manual preview
Hunter Series
Brand: Galaxy Pages: 30
mikroElektronika Pressure click Quick Start Manual preview
Pressure click
Brand: mikroElektronika Pages: 2
Planet WNAP-7335 Quick Installation Manual preview
WNAP-7335
Brand: Planet Pages: 2

Brands by name

Popular brands

Load more brands