manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

Device Configuration 5 - 31

Once the configurations of existing Virtual Interfaces have been reviewed, determine whether a new interface requires 
creation, or an existing Virtual Interface requires edit or deletion.

6. Select 

Add

 to define a new Virtual Interface configuration, 

Edit

 to modify the configuration of an existing Virtual Interface 

or 

Delete

 to permanently remove a selected Virtual Interface.

Figure 5-17

Virtual Interfaces - Basic Configuration tab

The 

Basic Configuration

 screen displays by default regardless of a whether a new Virtual Interface is being created or an 

existing one is being modified.

7. If creating a new Virtual Interface, use the 

Name

 spinner control to define a numeric ID from 1 - 4094.

8. Define the following parameters from within the 

Properties 

field:

VLAN

Displays the numerical VLAN ID associated with each listed interface.

IP Address

Defines whether DHCP was used to obtain the primary IP address used by the Virtual 
Interface configuration.

Description

Provide or edit a description (up to 64 characters) for the Virtual Interface that helps 
differentiate it from others with similar configurations. 

Admin Status

Either select the 

Disabled

 or 

Enabled

 radio button to define this interface’s current status 

within the network. When set to Enabled, the Virtual Interface is operational and 
available. The default value is Disabled.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

D-Link GO-RT-N300 Quick Installation Manual preview
GO-RT-N300
Brand: D-Link Pages: 32
D-Link DXN-W224 Quick Start Manual preview
DXN-W224
Brand: D-Link Pages: 6
D-Link DSR-250N User Manual preview
DSR-250N
Brand: D-Link Pages: 221
D-Link Express Ethernetwork DI-707P Quick Installation Manual preview
Express Ethernetwork DI-707P
Brand: D-Link Pages: 14
D-Link DSL-2640BT Installation Manual preview
DSL-2640BT
Brand: D-Link Pages: 12
NEC Express5800/E120d-M Getting Started preview
Express5800/E120d-M
Brand: NEC Pages: 2
Garland P1GCCAS Installation Manual preview
P1GCCAS
Brand: Garland Pages: 4
3Com 3C13886 - Router OC-3 ATM SML Flexible Interface... Installation Manual preview
3C13886 - Router OC-3 ATM SML Flexible Interface...
Brand: 3Com Pages: 171
3Com OfficeConnect WX2200 User Manual preview
OfficeConnect WX2200
Brand: 3Com Pages: 204
ADC HiGain HLU-231 List 8F Quick Installation preview
HiGain HLU-231 List 8F
Brand: ADC Pages: 7
Fracarro FRPRO EVO HD Quick Start Manual preview
FRPRO EVO HD
Brand: Fracarro Pages: 12
Multitech MultiConnect SE MTS2EA Specification Sheet preview
MultiConnect SE MTS2EA
Brand: Multitech Pages: 2
JETWAY HBJC924R3288DG2NS Series Quick Installation Manual preview
HBJC924R3288DG2NS Series
Brand: JETWAY Pages: 6
Datasat DDR-16 AES67 Installation And Operating Manual preview
DDR-16 AES67
Brand: Datasat Pages: 24
Ubiquiti PBE-5AC-300-ISO Quick Start Manual preview
PBE-5AC-300-ISO
Brand: Ubiquiti Pages: 28
ADS Technologies PTV-352-EFG Hardware Quickmanual preview
PTV-352-EFG
Brand: ADS Technologies Pages: 1
Advantech ARK-1380 User Manual preview
ARK-1380
Brand: Advantech Pages: 50
Galaxy Hunter Series Quick Start Manual preview
Hunter Series
Brand: Galaxy Pages: 30

Brands by name

Popular brands

Load more brands