manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

Device Configuration 5 - 289

9. Click the 

Next

 button to go to the next configuration screen. Use the 

Back

 button to go to the previous step.

Figure 5-182

VPN Step-By-Step Wizard - Step 4

10. Review the configuration and click the 

Done

 button to create the VPN tunnel. Use the 

Back

 button to go back to previous 

screen for making modifications to the configuration. Click 

Close

 to close the wizard without creating a VPN Tunnel.

5.4.5.5.4 Overriding Auto IPSec Tunnel Settings

Overriding a Security Configuration

IPSec tunnels are established to secure traffic, data and management traffic, from access points to remote wireless controllers. 
Secure tunnels must be established between access points and the wireless controller with minimum configuration pushed 
through DHCP option settings.

1. Select 

Devices

 from the Configuration tab.

2. Select 

Device Overrides

 from the Device menu to expand it into sub menu options.

Mode

This field is enabled when 

Create New Policy

 is selected in 

Transform Set

 field. The mode 

indicates how packets are transported through the tunnel.

•

Tunnel

 – Use this mode when the tunnel is between two routers or servers.

•

Transport

 – Use this mode when the tunnel is created between a client and a server. 

Security Association

Configures the lifetime of a 

security association

 (SA). Keys and SAs should be periodically 

renewed to maintain security of the tunnel.

•

Lifetime

 – Duration in seconds after which the keys should be changed. Set a value in from 

500 - 2,147,413,646 seconds.

•

Data

 – The key is changed after this quantity of data has be encrypted/decrypted. Set a 

value from 500 - 2,147,413,646 KBs.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

D-Link DES-1228/ME User Manual preview
DES-1228/ME
Brand: D-Link Pages: 267
Wattle Pegasus Quick Installation Manual preview
Pegasus
Brand: Wattle Pages: 6
Baicells Nova430i Quick Manual preview
Nova430i
Brand: Baicells Pages: 8
Cambium Networks PTP 820 Series Manual preview
PTP 820 Series
Brand: Cambium Networks Pages: 29
ICP DAS USA ZT-2510 Series Quick Start Manual preview
ZT-2510 Series
Brand: ICP DAS USA Pages: 8
TC Electronic DB6 User Manual preview
DB6
Brand: TC Electronic Pages: 174
TC Electronic Finalizer Express User Manual preview
Finalizer Express
Brand: TC Electronic Pages: 33
Opengear IMG4216-25 Quick Start Manual preview
IMG4216-25
Brand: Opengear Pages: 2
Mylex eXtremeRAID 1100 Installation Manual preview
eXtremeRAID 1100
Brand: Mylex Pages: 74
Klark Teknik DN9650 Operator'S Manual preview
DN9650
Brand: Klark Teknik Pages: 50
EKF Electronik CompactPCI CC8-BLUES User Manual preview
CompactPCI CC8-BLUES
Brand: EKF Electronik Pages: 52
Analog Devices EZ-Extender Analog 120-Pin Probing Board Manual preview
EZ-Extender Analog 120-Pin Probing Board
Brand: Analog Devices Pages: 29
Orolia Seven Solutions WR-ZEN Series User Manual preview
Seven Solutions WR-ZEN Series
Brand: Orolia Pages: 167
Ubiquiti airMAX NanoBridge M NBM3 Quick Start Manual preview
airMAX NanoBridge M NBM3
Brand: Ubiquiti Pages: 24
Tripp Lite SmartRack SR25UBEXP Specifications preview
SmartRack SR25UBEXP
Brand: Tripp Lite Pages: 4
Cypress Semiconductor CY7C1441AV33 Specification Sheet preview
CY7C1441AV33
Brand: Cypress Semiconductor Pages: 31
AMD -K6-2/450 - MHz Processor Application Note preview
-K6-2/450 - MHz Processor
Brand: AMD Pages: 98
El.Mo 090010932 User Manual preview
090010932
Brand: El.Mo Pages: 16

Brands by name

Popular brands

Load more brands