manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

Device Configuration 5 - 215

Figure 5-134

Device Overrides – Virtual Interfaces Dynamic Routing screen

19. Refer to the following to configure 

OSPF Settings.

20. Configure the 

OSPF Authentication Type

 settings by selecting from the drop-down list. The available options are 

None

, 

null

, 

simple-password

 and 

message-digest

.

Priority

Select this option to enable or disable OSPF priority settings. Use the spinner to configure 
a value from 0 - 255. This option sets the priority of this interface becoming the 

Designated 

Router

 (DR) for the network. DRs provide routing updates to the network by maintaining a 

complete topology table of the network and sends the updates to the other routers in the 
network using multicast. Setting a high value increases the chance of this interface 
becoming a DR. Setting this value to Zero (0) prevents this interface from being elected a 
DR.

Cost

Select this option to enable or disable OSPF cost settings. Use the spinner to configure a 
cost value from 1 - 65535. Use this option to set the OSPF cost of this interface. OSPF cost 
is the overhead required to send a packet over this interface.

Bandwidth

Select this option to enable or disable OSPF bandwidth settings. Use the spinner to 
configure a bandwidth settings from 1 - 10,000,000 KBps. Use this option to set the 
bandwidth of this interface in KBps.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

Rabbit 2000 Designers Handbook preview
2000
Brand: Rabbit Pages: 45
Rabbit 2000 Instruction & Reference Manual preview
2000
Brand: Rabbit Pages: 174
Rabbit 2000 Getting Started preview
2000
Brand: Rabbit Pages: 43
D-Link NetDefend DFL-260E Reference Manual preview
NetDefend DFL-260E
Brand: D-Link Pages: 328
D-Link ShareCenter Pulse DNS-320 Quick Install Manual preview
ShareCenter Pulse DNS-320
Brand: D-Link Pages: 2
D-Link DFL-210 - NetDefend - Security Appliance Firewall Registration Manual preview
DFL-210 - NetDefend - Security Appliance
Brand: D-Link Pages: 19
D-Link DFL-M510 Faq preview
DFL-M510
Brand: D-Link Pages: 22
D-Link DFE-680TX Quick Install Manual preview
DFE-680TX
Brand: D-Link Pages: 4
Dahua N300 Quick Start Manual preview
N300
Brand: Dahua Pages: 12
D-Link NetDefend DFL-1600 Quick Manual preview
NetDefend DFL-1600
Brand: D-Link Pages: 23
B2 ABB2050 Instruction Manual preview
ABB2050
Brand: B2 Pages: 52
Harmonic XOS User Manual preview
XOS
Brand: Harmonic Pages: 56
Aleratec 310108 Quick Start Manual preview
310108
Brand: Aleratec Pages: 12
Delta Tau PMAC2-PC/104 Installation Manual preview
PMAC2-PC/104
Brand: Delta Tau Pages: 74
Cypress Semiconductor CY7C1019D Specification Sheet preview
CY7C1019D
Brand: Cypress Semiconductor Pages: 11
Supermicro SuperServer 5019S-L User Manual preview
SuperServer 5019S-L
Brand: Supermicro Pages: 61
Time domain PulsON 440 Datasheet And User Manual preview
PulsON 440
Brand: Time domain Pages: 64
Parker PCH1 T P Series User Manual preview
PCH1 T P Series
Brand: Parker Pages: 107

Brands by name

Popular brands

Load more brands