manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

5 - 238 WiNG 5.5 Access Point System Reference Guide 

Figure 5-146

Device Overrides - Network DNS screen

6. Provide or override the default Domain Name used when resolving DNS names. The name cannot exceed 64 characters.

7. Set or override the following 

Domain Name System 

(DNS) settings:

8. Provide a list of up to three DNS servers to forward DNS queries if DNS resources are unavailable. The DNS name servers 

are used to resolve IP addresses. Use the Clear link next to each DNS server to clear the DNS name server’s IP address from 
the list.

9. Select

 OK

 to save the changes and overrides made to the DNS configuration. Select

 Reset

 to revert to the last saved 

configuration.

5.4.5.4.2 Overriding an ARP Configuration

Overriding the Network Configuration

Address Resolution Protocol

 (ARP) is a protocol for mapping an IP address to a hardware MAC address. ARP provides protocol 

rules for making this correlation and providing address conversion in both directions. This ARP assignment can be overridden 

NOTE: 

A blue override icon (to the left of a parameter) defines the parameter as having 

an override applied. To remove an override, go to the Basic Configuration screen’s Device 
Overrides field and select 

Clear Overrides

. This will remove all overrides from the 

device.

Enable Domain Lookup

Select this option to enable DNS on the access point. When enabled, human friendly 
domain names can be converted into numerical IP destination addresses. The radio button 
is selected by default.

Enable DNS Server 
Forwarding

Select this option to enable the forwarding DNS queries to external DNS servers if a DNS 
query cannot be processed by the access point’s own DNS resources. This feature is 
disabled by default.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

Dahua Smart 1U Quick Start Manual preview
Smart 1U
Brand: Dahua Pages: 24
Planet ADSL 2/2+ Router with USB Port ADE-3410v2 User Manual preview
ADSL 2/2+ Router with USB Port ADE-3410v2
Brand: Planet Pages: 62
Patton electronics 6103 User Manual preview
6103
Brand: Patton electronics Pages: 12
Renesas Converter Board R0E5212BACFG00 User Manual preview
Converter Board R0E5212BACFG00
Brand: Renesas Pages: 6
ZyXEL Communications NBG-460N Manual preview
NBG-460N
Brand: ZyXEL Communications Pages: 5
Cypress Semiconductor CY7C1329H Specification Sheet preview
CY7C1329H
Brand: Cypress Semiconductor Pages: 16
Optostar OP-8000-EDFA-1U Series Manual preview
OP-8000-EDFA-1U Series
Brand: Optostar Pages: 9
Tandy 26-3814 Operation Manual preview
26-3814
Brand: Tandy Pages: 24
Korenix JetNet 3508-LVDC User Manual preview
JetNet 3508-LVDC
Brand: Korenix Pages: 16
Ace ADSL2+ Wireless MIMO Router User Manual preview
ADSL2+ Wireless MIMO Router
Brand: Ace Pages: 64
Bitspower BPTA-CPUMS-V2-SKA Instruction Manual preview
BPTA-CPUMS-V2-SKA
Brand: Bitspower Pages: 6
ANEP P4GU VoLTE Technical Data Sheet preview
P4GU VoLTE
Brand: ANEP Pages: 48
SilverStone GD05 Manual preview
GD05
Brand: SilverStone Pages: 28
Zoom 4401F Specification Sheet preview
4401F
Brand: Zoom Pages: 2
Keithley DAS-1800HR Series User Manual preview
DAS-1800HR Series
Brand: Keithley Pages: 139
Meinberg CPU-C15G2 Setup Manual preview
CPU-C15G2
Brand: Meinberg Pages: 14
Uctronics U6180 Instruction Manual preview
U6180
Brand: Uctronics Pages: 2
Inspired Energy ATA004N Operating Instructions preview
ATA004N
Brand: Inspired Energy Pages: 5

Brands by name

Popular brands

Load more brands