manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

13 - 120 WiNG 5.5 Access Point System Reference Guide 

13.3.23.6 DHCP Snooping

Firewall

When DHCP servers are allocating IP addresses to clients on the LAN, DHCP snooping can be configured to better enforce the 
security on the LAN to allow only clients with specific IP/MAC addresses.

1. Select the 

Statistics

 menu from the Web UI.

2. Select 

System 

from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its 

connected access points.

3. Select 

F

irewall 

and expand the menu to reveal its sub menu items

.

4. Select 

DHCP Snooping

.

Figure 13-79

Access Point - Firewall DHCP Snooping screen

The

 

DHCP Snooping 

screen displays the following: 

Forward Dest Port

Destination port for the forward NAT flow (contains ICMP ID if it is an ICMP flow).

Reverse Source IP

Displays the source IP address for the reverse NAT flow.

Reverse Source Port

Displays the source port for the reverse NAT flow (contains ICMP ID if it is an ICMP flow).

Reverse Dest IP

Displays the destination IP address for the reverse NAT flow.

Reverse Dest Port

Displays the destination port for the reverse NAT flow (contains ICMP ID if it is an ICMP flow).

Refresh

Select the 

Refresh 

button to update the screen’s statistics counters to their latest values.

MAC Address

Displays the MAC address of the client requesting DHCP resources from the controller or 
service platform.

Node Type

Displays the NetBios node from which IP addresses can be issued to client requests on this 
interface.

IP Address

Displays the IP address used for DHCP discovery, and requests between the DHCP server and 
DHCP clients.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

D-Link AirPlus DWL-810 Owner'S Manual preview
AirPlus DWL-810
Brand: D-Link Pages: 25
Parker H Series Installation & Service Instructions Manual preview
H Series
Brand: Parker Pages: 344
NETGEAR FS605 v3 Installation Manual preview
FS605 v3
Brand: NETGEAR Pages: 84
Hama 00039747 Operating Instruction preview
00039747
Brand: Hama Pages: 6
Keithley 7011-C Instruction Manual preview
7011-C
Brand: Keithley Pages: 98
3Ware 9550SX Series Installation Manual preview
9550SX Series
Brand: 3Ware Pages: 4
NCR 7702-K134 Upgrade Manual preview
7702-K134
Brand: NCR Pages: 15
IBM Power System S914 Installing Instructions preview
Power System S914
Brand: IBM Pages: 48
Konica Minolta SRX-101A Operation Manual preview
SRX-101A
Brand: Konica Minolta Pages: 31
Dave Embedded Systems diDo Hardware Manual preview
diDo
Brand: Dave Embedded Systems Pages: 79
AMC DSP 88 User Manual preview
DSP 88
Brand: AMC Pages: 28
Fast FV3000-W2K Instruction Manual preview
FV3000-W2K
Brand: Fast Pages: 66
ActionTec GE344000-01 User Manual preview
GE344000-01
Brand: ActionTec Pages: 87
Juniper LN1000 - RELEASE NOTES 8-27-2010 User Manual preview
LN1000 - RELEASE NOTES 8-27-2010
Brand: Juniper Pages: 64
NETGEAR ReadyNAS Duo v2 Software Manual preview
ReadyNAS Duo v2
Brand: NETGEAR Pages: 100
Adaptec 2025ZCR - SCSI RAID Storage Controller Datasheet preview
2025ZCR - SCSI RAID Storage Controller
Brand: Adaptec Pages: 2
Altera tPad DE2-115 User Manual preview
tPad DE2-115
Brand: Altera Pages: 43
EtherWAN EX17016 Installation Manual preview
EX17016
Brand: EtherWAN Pages: 2

Brands by name

Popular brands

Load more brands