Motoman PX2750, Manual

Page: 383 / 611

3.9 Tool Data Setting
3-38
*4
The selection dialog is displayed. Select the teaching point for calibration.
*5
Taught position is registered.
Repeat *4~*5 operation to teach TC1 to TC5.
'
indicates that teaching is completed and
*
indicates that it is not completed.
To check the taught positions, call up the required display among TC1 to TC5 and
press [FWD]. The manipulator moves to the set position.
If there is a difference between the current position of the manipulator and the dis-
played position data, “TC
!
“ next to “POSITION” in the display flashes.
*6
Calibration data is registered in the tool file. Once calibration is completed, the tool
coordinate display is shown.
T O O L C A L I B R A T I O N
TOOL NO. : 00 POSITION : T C 1
** :S * <STATUS>
L * TC1
U * TC2
R * TC3
B * TC4
T * TC5
!
D A T A
E D I T D I S P L A Y U T I L I T Y
C A N C E L
C O M P L E T E
R 1 : R O B O T 1
R 2 : R O B O T 2
R 1 : R O B O T 1
R1 S C
L
T O O L C A L I B R A T I O N
TOOL NO. : 00 POSITION : T C 1
R1:S * <STATUS>
L * TC1
U * TC2
R * TC3
B * TC4
T * TC5
!
C A N C E L
D A T A E D I T D I S P L A Y U T I L I T Y
C O M P L E T E
T C 1
T C 2
T C 3
T C 4
T C 1
R1 S C
L
T O O L C A L I B R A T I O N
TOOL NO. : 00 POSITION : T C 4
R1:S 0 <STATUS>
L 10 TC1
U 1000 TC2
R 53 TC3
B 200 TC4
T 8 TC5
!
C A N C E L
D A T A E D I T D I S P L A Y U T I L I T Y
C O M P L E T E
R1
S
C
L