Mitsubishi Electric MELSERVO-JE MR-JE-100A, Instruction Manual

Page: 297 / 310

APPENDIX
App. - 4
(f) Branch circuit protection
For installation in United States, branch circuit protection must be provided, in accordance with the
National Electrical Code and any applicable local codes.
For installation in Canada, branch circuit protection must be provided, in accordance with the
Canada Electrical Code and any applicable provincial codes.
(4) South Korea compliance
This product complies with the Radio Wave Law (KC mark). Please note the following to use the
product.
넩 韥韥鱉 꽺ꓩ끞
(A
鞾
)
놹녅볁놶뼞韥韥ꈑ꫑ 볅 ꎙ녅 鿅鱉 ꩡ끞녅鱉 넩 뇅냹 늱넍뼍겑韥 ꗉꄱꐥ᧨
閵뇊뀭넍덵꾢꾅꫑ ꩡ끞뼍鱉 阸냹 ꑞ놶냱 ꈑ 뼞鱽鲙
.
(The product is for business use (Class A) and meets the electromagnetic compatibility requirements.
The seller and the user must note the above point, and use the product in a place except for home.)
App. 2.1.4 General cautions for safety protection and protective measures
Observe the following items to ensure proper use of the MELSERVO MR-JE servo amplifiers.
(1) Only qualified personnel and professional engineers should perform system installation.
(2) When mounting, installing, and using the MELSERVO MR-JE servo amplifier, always observe standards
and directives applicable in the country.
App. 2.1.5 Disposal
Disposal of unusable or irreparable devices should always occur in accordance with the applicable country-
specific waste disposal regulations. (Example: European Waste 16 02 14)
App. 2.2 Mounting/dismounting
Installation direction and clearances
CAUTION
The devices must be installed in the specified direction. Not doing so may cause
a malfunction.
Mount the servo amplifier on a cabinet which meets IP54 in the correct vertical
direction to maintain pollution degree 2.
10 mm
or more
80 mm or longer
for wiring
10 mm
or more
Top
Bottom
40 mm
or more
40 mm
or more
Cabinet
Servo amplifier
Servo
amplifier
Cabinet