Mitsubishi Electric MELSERVO-JE MR-JE-100A, Instruction Manual

Page: 169 / 310

5. PARAMETERS
5 - 42
Control mode
No./
symbol/name
Setting
digit
Function
Initial
value
[unit]
P S T
PD34
*DOP5
Function
selection D-5 _ _ _ x Alarm code output
This is used to select if output alarm codes.
Alarm codes are outputted to pins CN1-23, CN1-24, and CN1-49.
0: Disabled
1: Enabled
For details of the alarm codes, refer to chapter 8.
When you select alarm code output while MBR or ALM is selected for CN1-23, CN1-
24, or CN1-49 pin, [AL. 37 Parameter error] will occur.
0h
_ _ x _ Selection of output device at warning occurrence
Select ALM (Malfunction) output status at warning occurrence.
0h
Setting
value
Device status
0
OFF
ON
OFF
ON
WNG
ALM
Warning occurrence
1
OFF
ON
OFF
ON
WNG
ALM
Warning occurrence
_ x _ _ For manufacturer setting 0h
x _ _ _ 0h
5.2.5 Extension setting 2 parameters ([Pr. PE_ _ ])
Control mode
No./
symbol/name
Setting
digit
Function
Initial
value
[unit]
P S T
PE41
EOP3
Function
selection E-3 _ _ _ x Robust filter selection
0: Disabled
1: Enabled
When you select "Enabled" of this digit, the machine resonance suppression filter 5
set in [Pr. PB51] is not available.
0h
_ _ x _ For manufacturer setting 0h
_ x _ _ 0h
x _ _ _ 0h