Mitsubishi Electric MELSERVO-JE MR-JE-100A, Instruction Manual

Page: 294 / 310

APPENDIX
App. - 1
App. 1 Peripheral equipment manufacturer (for reference)
Names given in the table are as of July 2013.
Manufacturer Contact information
JST J.S.T. Mfg. Co., Ltd.
3M 3M
Soshin Electric Soshin Electric Co., Ltd.
App. 2 Compliance with global standards
App. 2.1 About safety
This section explains safety of users and machine operators. Please read the section carefully before
mounting the equipment.
App. 2.1.1 Professional engineer
Only professional engineers should mount MR-JE servo amplifiers.
Here, professional engineers are persons who have taken proper engineering training qualified persons who
are engaged in electrical equipment.
Please note if you can take a proper engineering training at your local Mitsubishi Electric office. Contact your
local sales office for schedules and locations.
App. 2.1.2 Applications of the devices
MR-JE servo amplifiers comply with the following safety standards.
IEC/EN 61800-5-1, IEC/EN 61800-3
App. 2.1.3 Correct use
Always use the MR-JE servo amplifiers within specifications (voltage, temperature, etc. Refer to section 1.3
for details.). Mitsubishi Electric Co. accepts no claims for liability if the equipment is used in any other way or
if modifications are made to the device, even in the context of mounting and installation.
WARNING
It takes 15 minutes for capacitor discharging. Do not touch the unit and terminals
immediately after power off.