Mindray BeneVision N1, Operator'S Manual

Page: 253 / 285

BeneVision N1 Patient Monitor Operator’s Manual D - 1
D
Alarm Messages
D.1 Physiological Alarm Messages
This section lists major physiological alarms, their default priority, and the actions that can be taken when an
alarm occurs. Some of alarms may not be included.
D.1.1 General Physiological Alarm Messages
Note: XX represents a measurement or parameter label, such as HR, NIBP, PVCs, RR, SpO
2
, PR, and so on.
D.1.2 Arrhythmia Alarm Messages
Alarm messages Default priority Cause and solution
XX High High/Med, configurable XX value has risen above the high alarm limit or fallen below the low
alarm limit. Check the patient’s condition and check if the patient
category and alarm limit settings are correct.
XX Low High/Med, configurable
Alarm message Default priority
Asystole High
V-Fib/V-Tach High
V-Tach High
Vent Brady High
Extreme Tachy High
Extreme Brady High
PVCs/min Med
Pauses/min Med
R on T Med
Bigeminy Med
Trigeminy Med
Tachy Med
Brady Med
Multiform PVC Med
Vent Rhythm Med
Nonsus V-Tach Med
Run PVCs Low
Pause Low
Couplet Prompt
PVC Prompt
Irr Rhythm Prompt
Pacer Not Pacing Prompt