BeneVision N1 Patient Monitor Operator’s Manual
19 - 3
◆
Select the
Main Menu
quick key
→
from the
Parameters
column select
Setup
→
select
the desired
parameter
→
select the
Alarm
tab.
2.
Switch on
On/Off
and
Alarm outputs
for desired parameters.
19.7
Stopping a Printing Task
To stop a printing task, follow this procedure:
1.
Select the
Main Menu
quick key
→
from the
Report
column select
Print Queue
.
2.
Select desired printing tasks and then select
Delete
. Selecting
Delete All
to stop all the printing tasks.
19.8
Setting Reports
This section focuses on how to set ECG reports, realtime reports, tabular trends reports, and graphic trends
reports.
19.8.1
Setting ECG Reports
To set ECG reports, follow this procedure:
1.
Select the
Main Menu
quick key
→
from the
Report
column
select
Normal Report
.
2.
Select
ECG Report
.
3.
Set
the desired options
.
The following table only lists some of the options.
NOTE
•
When ECG Lead Set is set to 3-Lead, ECG report cannot be printed.
Menu item
Function
Description
Auto Interval
Defines the spacing
between the ECG
waveforms
on a
printout
On:
automatically adjusts the space between waveforms to
avoid overlapping.
Off
: each waveform area has the same sizeon a printout.
Note: This setting is only relevant when
12×1
is selected for
12-Lead Format
.
12-Lead Format
Select the format of 12-
lead ECG waveforms
on a printout.
12×1:
displays 12-lead ECG waveforms on one page in one
column.
6×2
: displays 12-lead ECG waveforms on one page in two
columns, with 6 lines in each column.
6×2+1
: displays 12-lead ECG waveforms on one page in two
columns, with 6 lines in each column, and one rhythm lead
waveform at the bottom.
3×4+1
: displays 12-lead ECG waveforms on one page in 4
columns, with 3 lines in each column, and one rhythm lead
waveform at the bottom.
3×4+3
: displays 12-lead ECG waveforms on one page in 4
columns, with 3 lines in each column, and three rhythm lead
waveforms at the bottom.
Rhythm Lead 1
Rhythm Lead 2
Rhythm Lead 3
Select the lead that will
be used as Rhythm
Lead 1, 2, or 3.
I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5, V6
Note: This setting is only relevant when
6×2+1
,
3×4+1
, or
3×4+3
is selected for
12-Lead
Format
.
Format sequence
Select the recording
method of ECG report
generated by auto
measurement
Sequential
: 12-lead ECG data are recorded sequentially and
displayed in 3 lines and 4 columns with 2.5 seconds of ECG data
for each column.
Simultaneous
: Record simultaneous 12-lead ECG data.
