BeneVision N1 Patient Monitor Operator’s Manual
7 - 3
7.3.4
Alarm Status Symbols
Apart from the alarm indicators as described in
, the monitor uses the following symbols
to indicate the alarm status:
7.4
Accessing On-screen Help for Technical Alarms (AlarmSight)
In the technical alarm list, alarm messages followed by
Detail
include help messages or pictures to help you
identify the problem. This function is called AlarmSight. To access AlarmSight, follow this procedure:
1.
Select the technical alarm information area to enter the
Alarms
window.
2.
Select the
Technical Alarms
tab.
3.
From the alarm list select the desired alarm.
7.5
Checking Physiological Alarm List
To check the physiological alarm list, follow this procedure:
1.
Select the physiological alarm information area to enter the
Alarms
window.
2.
Select the
Physiological Alarms
tab.
7.6
Changing Alarm Settings
From the
Alarm
column of the main menu select desired buttons to set alarm properties.
7.6.1
Setting Parameter Alarm Properties
To set parameter alarm properties, follow this procedure:
1.
Select the
Main Menu
quick key
→
from the
Alarm
column select
Limits.Enter the password if required.
2.
Select a parameter tab and set alarm properties as desired.
You can also change the alarm properties of individual parameter from corresponding parameter menu.
Alarm pause:
indicates that all the alarms are paused.
Alarm off:
indicates that individual measurement alarms are turned off or the system is in the alarm off
status.
Audio pause:
indicates that audible alarm tones are paused.
Audio off:
indicates that audible alarm tones are turned off.
Alarm reset:
indicates that alarms are acknowledged and the alarm system is reset.
