BeneVision N1 Patient Monitor Operator’s Manual
2 - 1
2
Equipment Introduction
2.1
Indications for Use
The BeneVision N1 Patient Monitor is intended for monitoring, displaying, reviewing, storing , alarming, and
transferring of multiple physiological parameters including ECG (3-lead, 5-lead, 6-lead or 12-lead selectable,
Arrhythmia Detection, ST Segment Analysis, QT Analysis, and Heart Rate (HR)), Respiration (Resp), Temperature
(Temp), Pulse Oxygen Saturation (SpO
2
), Pulse Rate (PR), Non-invasive Blood Pressure (NIBP), Invasive Blood
Pressure (IBP), Pulmonary Artery Wedge Pressure (PAWP), Carbon Dioxide (CO
2
) and Oxygen (O
2
). The system
also provides an interpretation of resting 12-lead ECG.
All the parameters can be monitored on single adult, pediatric, and neonatal patients except for the following:
■
PAWP is intended for adult and pediatric patients only
The BeneVision N1 monitor is to be used in healthcare facilities. It can also be used during patient transport
inside and outside of the hospital environment. It should be used by clinical professionals or under their
guidance. It should only be used by persons who have received adequate training in its use. It is not intended for
home use.
2.2
Applied Parts
The applied parts of the monitor are:
■
ECG electrode and leadwire
■
SpO
2
sensor
■
Temp probe
■
NIBP cuff
■
IBP transducer
■
CO
2
sampling line/nasal sampling cannula, water trap, and mask
2.3
Main Unit
2.3.1
Front View
BeneVision N1
(5)
(4)
(3)
(2)
(1)
