19 - 2
BeneVision N1 Patient Monitor Operator’s Manual
19.3.2
Setting
Patient Information on Other Reports
To set the patient information you want to display on other reports, follow this procedure:
1.
Select the
Main Menu
quick key
→
from the
System column
select
Maintenance
→
input the required
password
→
select .
2.
Select the
tab.
3.
Select the
Report Layout
tab.
4.
Select the desired items under
Report Name
.
N/A
indicates that this item is not displayed on a report.
19.4
Setting End Case Reports
All normal reports can be set as end case reports. If you enable
Print End Case Report
when you discharge a
patient, the monitor will automatically print the end case reports.
To set a normal report as an end case report, follow this procedure:
1.
Select the
Main Menu
quick key
→
from the
Report
column select
End Case Report
.
2.
Select the desired report tab, for example
ECG Report
.
3.
Switch on
Set As End Case Report
to set the selected report to the end case report.
19.5
Manually Starting a Printing Task
You can start a printing task manually.
19.5.1
Starting Printing from the Current Page
From the current page, select the
button, if available, to start printing.
19.5.2
Printing Realtime Reports
Select the
quick key to print a realtime report. You can also print a realtime report from the
Normal
Report
page. For more information, see
19.5.3 Printing Normal Reports
.
19.5.3
Printing Normal Reports
Normal reports refers to the following types of reports:
■
ECG Report
■
Realtime Report
■
Tabular Trends Report
■
Graphic Trend Report.
To print normal reports, follow this procedure:
1.
Select the
Main Menu
quick key
→
from the
Report
column select
Normal Report
.
2.
Select the desired report tab.
3.
Check the settings.
4.
Select
.
19.6
Automatically Printing Reports
When a parameter alarm switch is set to on and an alarm is triggered for this parameter, you can set a printer to
start alarm printing automatically.
To do so, follow this procedure:
1.
Access alarm related tabs such as the
Alarm
tab for a parameter in one of the following ways:
◆
Select the parameter or waveform area of the desired parameter
→
select the
Alarm
tab.
