5 - 2
BeneVision N1 Patient Monitor Operator’s Manual
To set the default configuration, follow this procedure:
1.
Select the
Main Menu
quick key
→
from the
Configuration
column select
Manage
→
input the required
password
→
select .
2.
Select
Select Default Config.
3.
Select
Load the Latest Config
or
Load Specified Config.
◆
When you select
Load Specified Config
, the restored configuration is subject to the patient category
(adult, pediatric or neonate). This configuration can be either factory configuration or a saved user
configuration. As an example, select
Default Adult Config
and then select
Factory Default
or user
configuration(s).
◆
When you select
Load the Latest Config
, the latest configuration is loaded when the monitor is
started or a patient is admitted.
5.4
Saving Current Settings
Current settings can be saved as a user configuration. Up to 10 user configurations can be saved.
To save current settings, follow this procedure:
1.
Select the
Main Menu
quick key
→
from the
Configuration
column select
Manage
→
input the required
password
→
select .
2.
Select
Save Current Settings
.
3.
Input the configuration name.
4.
Select
OK
to save current settings as a user configuration.
5.5
Deleting a Configuration
To delete a configuration, follow this procedure:
1.
Select the
Main Menu
quick key
→
from the
Configuration
column select
Manage
→
input the required
password
→
select
.
2.
Select
Delete Configuration
.
3.
Select the configuration you want to delete:
◆
In the
Delete Configuration
menu, selecting
Local
tab shows the existing user configurations on the
monitor.
◆
In the
Delete Configuration
menu, selecting
USB Drive
tab shows the existing user configurations
on the USB drive.
4.
Select
Delete
.
5.
Select
OK
.
5.6
Transferring a Configuration
When installing several monitors with identical user configurations, it is not necessary to set each unit
separately. Use a USB drive to transfer the configuration from monitor to monitor.
5.6.1
Exporting a Configuration
To export the current monitor’s configuration, follow this procedure:
1.
Connect the monitor to the Dock.
2.
Connect the USB drive to the Dock’s USB port.
3.
Select the
Main Menu
quick key
→
from the
Configuration
column select
Manage
→
input the required
password
→
select
.
4.
Select
Export Configuration
.
5.
Select the configurations and
User Maintenance Settings
to export.
6.
Select
Export
.
