2 - 10
BeneVision N1 Patient Monitor Operator’s Manual
CAUTION
•
If you need the analog signals, use the multifunctional connector of the N1 instead of the Micro-D
connector of the BeneView T series monitor when the two monitors are connected.
2.8.1
Connecting N1 to the Host Monitor through the Module Rack
To connect the N1 to the module rack of the host monitor, follow this procedure:
1.
Insert N1 to the host monitor’s module rack. Firmly push N1 until you hear that the clip (refer to
) engages the module rack.
2.
To ensure that N1 is properly connected, try to pull N1 outward. N1 properly engages the module rack if
you cannot pull N1 out.
To remove N1 from the module rack of the host monitor, lift the latch (refer to
) at the bottom of
N1 and pull N1 out.
CAUTION
•
To prevent N1 from falling off, after inserting N1 into the module rack, always check that N1 properly
engages the module rack.
•
To prevent N1 from falling off, catch it with another hand while pulling it out from the module rack.
NOTE
•
There is no module rack for the BeneVision N22 or BeneVision N19 monitor. The N1 can be
connected to the BeneVision N22 and BeneVision N19 monitor through the SMR or Dock.
2.8.2
Connecting N1 to the Host Monitor through the Satellite Module Rack (SMR)
To connect the N1 to the host monitor through the SMR, follow this procedure:
1.
Connect the SMR to the host monitor.
2.
Insert N1 to the SMR. Firmly push N1 until you hear that the clip (refer to
) engages the
SMR.
To ensure that N1 is properly connected, try to pull N1 outward. N1 properly engages the module rack if you
cannot pull N1 out.
To remove N1 from the SMR, lift the latch (refer to
) at the bottom of N1 and pull N1 out.
CAUTION
•
To prevent N1 from falling off, after inserting N1 into the SMR, always check that N1 properly
engages the SMR.
•
To prevent N1 from falling off, catch it with another hand while pulling it out from the SMR.
2.8.3
Connecting N1 to the Host Monitor through the Dock
To connect the N1 to the host monitor through the Dock, follow this procedure:
