BeneVision N1 Patient Monitor Operator’s Manual
2 - 9
Firmly push N1 until you hear that the clip (refer to
) engages the Dock. To ensure that N1 is
properly connected, try to pull N1 outward. N1 properly engages the Dock if you cannot pull it out.
2.7.6
Removing the N1 from the Dock
To remove the N1 from the Dock, follow this procedure:
1.
Press and hold the latch at the bottom of N1.
2.
Pull the N1 out as indicated.
2.8
N1 in Use with the Host Monitor
When the N1 is connected to the BeneVision N series monitor or BeneView T series monitor, the N1 works as the
parameter module while BeneVision N series monitor or BeneView T series monitor works as the host monitor.
For more information, see section
N1 can be connected to the host monitor through the following parts:
■
The module rack of the host monitor
■
The Satellite Module Rack (SMR)
■
The Dock
BeneVision N series and BeneView T series monitor that can be used as N1 host monitor are as follows:
■
BeneVision 22, BeneVision N19, BeneVision N17, BeneVision N15, BeneVision N12, and BeneVision N12C
■
BeneView T5, BeneView T6, BeneView T8, and BeneView T9
1
2
