MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 86 / 218

- 2.32 -
Using The Fabric Core Support Pipe
In case the fabric core with 3 inch specification is thin and therefore folds in a V shape, use the
supplied fabric core support pipe with the small roll holder.
Steps;
1. Lead the fabric core support pipe into the 3
inch pipe.
2. Fix the core and support pipe with tape.
3. Loosen the hand screws of the both side of the
roll holders and then remove the large holders
with hand screws.
• The space is tight between roll holders
(Large and Small). Remove the Big one
with making some room using the flat
head screw driver.
4. Insert the small roll holder into the support
pipe and fix it with hand screws.
When the roll holder have been inserted all the way into the pipe,
secure it with the screw.
Taping