MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 75 / 218

- 2.21 -
Setting New fabric (Media Set)
In case perform the fabric width detection again or re-select the fabric kinds (Roll or Leaf) when
setting new fabric or re-setting fabric.
Steps
1. Set a new fabric (Roll or Leaf fabric).
2. Press [FUNCTION] key.
3. Select [MEDIA SET] by pressing the JOG keys
[ ] and [ ].
4. Press [ENTER] key.
5. Press [ENTER] key to reset then, perform the
leaf fabric width detection.
FUNCTION
SETUP
< ENT >
FUNCTION
MEDIA SET
< ENT >
<< LOCAL >>
width : 1620mm
MEDIA SET
ROLL < > LEAF
MEDIA SET
Capacity = 110 m
MEDIA SET
Capacity = 650 m
Detecting Media
Please Wait
∗∗ MEDIA ∗∗
X= ∗∗∗∗ Y= ∗∗∗∗
<< LOCAL >>
width : 1620mm
MEDIA SET
ROLL < > LEAF
Feeding Dev. OFF
Take-Up Dev. OFF
Spiral Rlr. OFF
Detecting Media
Please Wait
∗∗ MEDIA ∗∗
X= ∗∗∗∗ Y= ∗∗∗∗
MEDIA SET
Media
: RESET
• In case the roll length has known when
the fabric of the roll is set, set the value.
This allows you to check the remaining
amount of roll.
Select ROLL Select LEAF