MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 132 / 218

- 3.24 -
Cleaning the flushing box and blower filter
When the message [Flushing Box] is displayed, clean the flushing box and blower filter immediately
or replace it with a new one. This message appears on the regular basis. Make sure to clean the
blower filter along with clearing flushing box.
• The flushing box is designated as supply parts. In case it is necessary, call
your local distributor or Mimaki sales office.
• Do not select [Flushing Box] unless the flushing box is to be really
changed. The number of operations that is counted in the Device will be
reset.
Cleaning the flushing box
1. Put the device into the MAINTENANCE mode.
(Refer to Page 3.13)
2. Press [ENTER] key.
3. Press [ENTER] key to select [Station].
4. Press [ ] and [ ] key until the display gives
the indication [Flushing Box].
5. Press [ENTER] key.
6. Open the station cover R, remove the hand
screw and then pull out the ANR unit.
• Chain the station cover.
(Refer to Page 3.12)
Flushing Box
Empty The Ink
FUNCTION
MAINTENANCE
< ENT >
MAINTENANCE
Station
< ent >
Station Maint
Sel
: CarriageOut
Station Maint
Sel
: FlushingBox