MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 27 / 218

- 1.7 -
Rear face
Name Function
1. Chain for Station cover R Chain holds the cover for maintenance inside the station.
2. Right station cover R Remove the cover when the belt meandering confirmation.
(Setup guide)
3. Curved bar inclination Located on both sides to adjust the angle of the curved bar.
adjustment screw
4. Mist fan filter Absorbing ink mists.
5. Curved bar Removes slacks on the fabric.
6. Pressure roller Applies pressure to fix the fabric to the belt.
7. Spiral roller Removes wrinkles of the fabric.
8. Lapel bar (4 pieces) Feeding belt is stabilized by through the fabric and attaching lapels.
9. Feeding tension bar weight Used to adjust the weight of the feeding tension bar.
10. Left station cover R Remove the cover when the belt meandering confirmation.
(Setup guide)
11. Chain for Station cover L Chain holds the cover for cleaning undersurface of the carriage.
12. Feeding tension bar Applies proper tension to the fabric to control operation of the feeding
unit.
13. Feeding device Loads the fabric roll automatically.
14. Interface connector The IEEE1394 and IEEE1284 compatible interface connector.
15. Power switch and inlet The power cable is connected to the AC inlet. The power cable is
connected to the AC inlet.
6
3
4
5
2
9
10
12
13
7
1
8
4
11
14
15