MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 56 / 218

- 2.2 -
Work Flow
The following explains the workflow from the power-on sequence up to the end of printing.
For details on each procedure, refer to the reference page.
Power on
Ink filling
LOCAL mode
Adjusting the head height
Nozzle check
Start printing
REMOTE
End printing
Transmitting the data
Media compensation
Power off
Setting origin
Setting the media
Using the feeding device
Usingt the feeding tension bar
Using the pressure roller
Using the spiral roller
Using the curved bar
Using the fabric edge guide
Using the peeling roller
Using the take-up tension bar
Using the heater
Using the take-up device
If you use the device for the first time,
be sure to perform this procedure.
Belt Wash: ON/OFF
Heater: ON/OFF
⇒ P. 1.28
Set the roll fablic
Set the leaf fabric ⇒ P. 2.5
⇒ P. 2.3
⇒
P. 2.33
⇒ P. 2.37
⇒
P. 2.40
⇒
P. 2.41
Other settings
Print adjust
⇒ P. 2.50
⇒
P. 4.20
⇒ P. 2.44
⇒ P. 2.48
⇒ P. 2.54
⇒
P. 2.3
⇒ P. 2.19
⇒ P. 2.7, 2.22
⇒ P. 2.6
⇒
P. 2.24
⇒ P. 2.28
⇒ P. 2.26
⇒ P. 2.13
⇒ P. 2.12
⇒ P. 2.14
⇒ P. 4.20
⇒
P. 2.16, 2.22