- 3.25 -
7.
Open the flushing box cover, remove the flush-
ing box.
• The flushing box contains ink. Remove it
being careful not to put the opening
downward.
8.
Dump the waste ink in the flushing box into the
waste ink tank.
Get the plug out of the flushing box and then, discard the waste ink
tank.
• Wash the flushing box with water after
discarding the waste ink. In case using the
box after washing shortly, dry the box out
well.
• If the device is not used more than one
day, discard waste ink in the flushing box
and wash the flushing box and filter.
• When the Ink blot of sponge is heavy, the
flushing box get weaker of absorption.
In case when you find the waste ink on the
belt retainer, make sure to confirm the
flushing box and then wash the sponge.
When the Ink blot of sponge is heavy
1. Pull the sponge out from the flushing
box and then wash it with water.
2. Dry the washed filter out.
3. Set the supplied filter.
4. Keep the dried filter for the next
changing.
9.
Set flushing box.
10. Put the ANR unit back, take the chain off from
the cover and close the station cover R, then
press [ENTER] key.
11. The device enters the fabric width.
Initialize
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ − − − − − − − −
Flashing Box
Completed
:ent
MEDIA SET
ROLL<
>LEAF
Summary of Contents for Textile Jet Tx3-1600
