MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 136 / 218

- 3.28 -
Replacing ANRS Media [ANR Unit]
Attachment of the ANRS media enables automatic nozzle recovery. If the media runs out, replace it
with a new media.
STEP
1. Put the device into the MAINTENANCE mode.
(Refer to Page 3.13)
2. Press [ENTER] key.
3. Press [ ] and [ ] key until the display gives
the indication [ANR Unit].
4. Press [ENTER] key.
5. Select [Media Set], then press [ENTER] key.
6. Replace the media.
a. Open the right station cover and then remove the knob screw of
the ANR unit.
• Chain the station cover.
(Refer to Page 3.12)
• If using the non-Mimaki genuine ANRS
check media, we can not guarantee the
normal operation. Be sure to use the
genuine ANRS check media.
FUNCTION
MAINTENANCE
< ENT >
MAINTENANCE
Station
< ent >
MAINTENANCE
ANR Unit < ent >
ANR Unit Maint.
Sel
: Media Set
ANR Unit Maint.
Sel
: Media Set