MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 57 / 218

- 2.3 -
Switching ON/OFF The Power Supply
After setting up the device, switch on and off the power as described below.
Turning the power on
STEP
1. Turn on the power to the blower.
2. Turn on the power to the heater.
3. Turn on the power to the device.
4. Turn on the power to the computer, etc. that
are connected to the device.
• At this time, the front cover and station
cover L,R must be closed.
With the front cover kept open, the
carriage does not move even when the
power is switched on.
• Since the heater indicator displays the
operating status, it may not light on even if
the power is turned ON.
When the power is turned on, [BOOT] is displayed, then the model
name and firmware version is shown.
The message “Please Wait” appears flashing on the LCD.The
initialization process is displayed.
The device enters the fabric width detection.
BOOT
Tx3-1600 V.1.00
MEDIA SET
ROLL< > LEAF
Please Wait
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ − − − − − − − −