MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 87 / 218

- 2.33 -
After Setting The Fabric On The Device
Adjusting the head height when changing fabric [Head Height]
When changing to the fabric of other kinds, it is necessary to adjust the head height according to the
thickness of the new fabric.
Operating without adjusting the head height is very dangerous: it can damage the fabric and the
printer. When a new fabric different in thickness from the current fabric is to be used, be sure to
make proper adjustment of the head height.
• [Head Height] is a function to set the distance between the fabric surface
and head to 3mm.
STEP
1. Confirm the device is the LOCAL mode.
2. Press [FUNCTION] key.
3. Press JOG keys[ ] and [ ] until the LCD gives
the indication [MAINTENANCE].
4. Press [ENTER] key.
5. Press JOG keys[ ] and [ ] until the LCD gives
the indication [Head Height].
6. Press [ENTER] key twice.
The carriage will come out of the capping station.
7. Open the station cover and the front cover.
8. Move the carriage manually to a position where
adjustment is easy.
Head Height
CarriageOut
: ent
<< LOCAL >>
width : 1620mm
FUNCTION
SET UP
< ENT >
FUNCTION
MAINTENANCE
< ENT >
MAINTENANCE
Station
< ent >
MAINTENANCE
Head Height
< ent >
Twice