MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 123 / 218

- 3.15 -
When the message [Clean WiperShaft] is displayed [CarriageOut]
[Clean WiperShaft] message is displayed after several numbers of wiping.
Please clean the wiper shaft at once if this message is displayed.
Extremely dirty wiper shaft may cause wiper malfunction and resulting an error display.
The wiper is functioning only during the head cleaning, and the number of wiping vary according to
the cleaning type.
• When replacing the wiper, also clean the wiper shaft.
STEP
1. Put the device into the MAINTENANCE mode.
(Refer to Page 3.13)
2. Press [ENTER] key.
3. Press [ENTER] key to select [Station].
4. Press [ENTER] key to select [CarriageOut].
The carriage come out to the belt.
5. Open the station cover R.
• Chain the station cover.
(Refer to Page 3.12)
6. Clean the wiper guide shaft using a swab or
cloth.
(If dirt is hard to remove, use a swab of cloth dampened with
water.)
• Extremely dirty wiper guide shaft may
cause wiper malfunction, resulting an error
display.
FUNCTION
MAINTENANCE
< ENT >
Wiper
Clean WiperShaft
MAINTENANCE
Station
< ent >
Station Maint
Sel
: CarriageOut
Station Maint
Sel
: CarriageOut