MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 150 / 218

- 4.8 -
Deciding the priority of settings by the computer OR the device [Priority]
This function gives priority on printing conditions set either on the computer or on the device.
Printing conditions can be set on data of the device and on data received from the computer using
the output software. If these printing conditions differ, priority is given to either of them at the time
when the printing operation is started.
HOST : The printing operation is performed with priority given to the com-
puter.
PLOT : The printing operation is performed with priority given the device.
Priority needs to be specified for each of the following items:
• Media Comp • Print Mode • Ink Layers • Refresh
• Belt Wash • Heater • ANRS
STEP
1. Select a type.
(Refer to Page 4.4). Here, select [Type.1].
2. Press [ENTER] key.
3. Press [ ] and [ ] key until the display gives
the indication [Priority].
4. Press [ENTER] key.
5. Select the [Media Comp.] that is given a prior-
ity using the [ ] and [ ] key.
Here, select [PLOT].
6. Press [ENTER] key.
7. Select the [PrintMode] that is given a priority
using the [ ] and [ ] key.
Here, select [PLOT].
8. Press [ENTER] key.
SET UP
Select : TYPE1
TYPE1
Ink Layers
: HOST
TYPE1
Print Mode
: PLOT
TYPE1
Print Mode
: HOST
TYPE1
Media Comp.
: PLOT
TYPE1
Media Comp.
: HOST
TYPE1
Priority
< ent >
TYPE1
Media Comp. < ent >