MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 135 / 218

- 3.27 -
Cleaning The Y Main Guide [Main Guide]
The cleaning message of the Y main guide appears when the head slider has performed scanning a
certain number of times. If the main guide is extremely dirty, malfunction may occur during print-
ing, a stop of printing. If a message appears, clean the Y main guide immediately.
• Use the supplied special oil to clean the guide. If the oil runs out, get it
from your local distributor.
• Clean the Y main guide once a week or every other week.
• Do not select [Main Guide] unless the wiper is to be really changed. The
number of wiper operations that is counted in the Device will be reset.
STEP
1. Put the device into the MAINTENANCE mode.
(Refer to Page 3.13)
2. Press [ENTER] key.
3. Press [ ] and [ ] key until the display gives
the indication [Station].
4. Press [ENTER] key.
5. Press [ENTER] key.
The carriage will come out of the station.
6. Open the front cover, station cover R and L
then cleaning the Y main guide.
7. Close covers, then press [ENTER] key.
The device enters the fabric width detection.
FUNCTION
MAINTENANCE
< ENT >
MAINTENANCE
Station
< ent >
MAINTENANCE
Main Guide
< ent >
Main Guide Maint
CarriageOut
: ent
Main Guide Maint
Completed
: ent
Initialize
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ − − − − − − − −
Y Main Guide
Clean Main Guide
Y main guide
MEDIA SET
ROLL< >LEAF
Front cover