MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 156 / 218

- 4.14 -
Setting a unit of length displayed on the LCD [mm/inch]
This function sets a unit of set values displayed on the LCD.
Use this function when displaying “width” and “length” of the fabric after setting of the origin or
detection of the fabric. When the device is shipped from the factory, the unit of display is set to MM
(millimeter).
mm : Numerics are expressed in millimeters.
inch : Numerics are expressed in inches.
STEP
1. Select a type.
(Refer to Page 4.4). Here, select [Type.1].
2. Press [ENTER] key.
3. Press [ ] and [ ] key until the display gives
the indication [mm/inch].
4. Press [ENTER] key.
5. Set a unit of length displayed on the LCD by
pressing the JOG keys [ ] and [ ] .
Here, select [mm].
6. Press [ENTER] key.
7. Press [END] key twice, and the menu returns to
the LOCAL mode.
SET UP
Select
: TYPE1
<< LOCAL >>
width : 1620mm
TYPE1
mm/inch
< ent >
TYPE1
mm/inch :mm
TYPE1
mm/inch :inch
TYPE1
mm/inch
< ent >
TYPE1
Media Comp.
< ent >