MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 208 / 218

- A.2 -
Basics Specifications
Item Tx3-1600
8 color set 4 color set
Printing head Method Piezo-electric drop-on demand
Specification Eight-heads (4 x 2 lines, Stagger arrangement)
Nozzle 360 nozzles for each color 720 nozzles for each color
Resolution 360 , 540, 720 dMpi
Drawing mode 360 x 360 dpi : 2 / 4 / 8passes, 360 x 360 dpi : 1 / 2 / 4passes,
Unidirection / bidirection Unidirection / bidirection
360 x 540 dpi : 3 / 6 / 12 passes, 360 x 540 dpi : 3 / 6 / 12passes,
Unidirection / bidirection Unidirection / bidirection
360 x 720 dpi :4 / 8 / 16 passes, 360 x 720 dpi :2 / 4 / 8passes,
Unidirection / bidirection Unidirection / bidirection
720 x 720 dpi : 4 / 8 / 16 passes, 720 x 720 dpi : 2 / 4 / 8 passes,
Unidirection / bidirection Unidirection / bidirection
Ink type Acid dye ink Color (Gray, Black, Cyan, Magenta, Yellow, Light Cyan, Light Magenta,
Blue, Red)
Reactive dye ink Color (Gray, Black, Cyan, Magenta, Yellow, Light Cyan, Light Magenta,
Blue, Orange, Red, Golden Yellow)
Disperse dye ink Color (Gray, Black, Cyan, Magenta, Yellow, Light Cyan, Light Magenta,
Blue, Light Blue)
Printing pigment Color (Black, Cyan, Magenta, Yellow)
Ink set 2 cartridges for each color 4 cartridges for each color
Acid dye ink for 8-color printing Acid dye ink for 4-color printing
Reactive dye ink for 8-color printing Reactive dye ink for 4-color printing
Disperse dye ink for 8-color printing Disperse dye ink for 4-color printing
Printing pigment ink for 4-color printing
Delivery system of ink Proprietary system with low ink detection sensor
Correction of the remaining amount of ink provided.
INK END detection function is provided.
Ink cartridge (Ink pack) replacement method.
Capacity of ink cartridge 220 cc ± 10 cc per cartrige (x2) 220 cc ± 10 cc per cartrige (x4)
1000 cc
±
30 cc per cartrige (x2) 1000 cc
±
30 cc per cartrige (x4)
Fabric type The following cloths are excluded.
• Curled or folded cloths
•
Cloths with a low firing point (when the drying unit is used)
Max. Printing width Width 1620 mm
Fabric size Thickness 7.0 mm or less
(Roll fabric)
Roll outside diameter
φ 270 mm or less
Roll weight 38 Kg or less
Roll inside diameter
More than 2 Inchs
Plotting surface Plotting can be made on either side.
Roll end treatment
Light-adhesive tape is used to allow the paper to be removed from the
core with ease.
Margin Left and Right end 10 mm
±
0.5 mm
(Roll fabric) Front end Approximately 2400 mm (When setting the take up device)
Back end Approximately 800 mm / Approximately 2800 mm
(When come away from feeding fabric core)