MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 161 / 218

- 4.19 -
Enabling Belt Cleaning Operation during Printing [Belt Wash]
This function enables the belt cleaning operation during printing.
For details, refer to “Cleaning the Belt during printing” on Page 2.50.
ON : Cleans the belt automatically.
OFF : Does not clean the belt.
STEP
1. Select a type. (Refer to Page 4.4)
Here, select [Type.1].
2. Press [ENTER] key.
3. Press [ ] and [ ] key until the display gives
the indication [Belt Wash].
4. Press [ENTER] key.
5. Set a [Belt Wash] by pressing the JOG keys [ ]
and [ ].
Here, select [ON].
6. Press [ENTER] key.
7. Press [END] key twice, and the menu returns to
the LOCAL mode.
• When the device is receiving the data or the unprinted data remains in the
dvice or the device is in the jog mode, the water absorption roller has been
risen. Make sure to delete the data before turning off.
SET UP
Select
: TYPE1
TYPE1
Media Comp.
< ent >
TYPE1
Belt Wash
< ent >
TYPE1
Belt Wash
: OFF
TYPE1
Belt Wash
: ON
TYPE1
Belt Wash
< ent >
<< LOCAL >>
width : 1620mm