MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 127 / 218

- 3.19 -
When the nozzle cannot be unclogged [Nozzle Clean]
Procedure
1. Put the device into the MAINTENANCE mode.
2. Press the [ENTER] key.
3. Select [Station], and press the [ENTER] key.
4. Press the JOG key [ ] or [ ] to select [Nozzle
Clean].
5. Press the [ENTER] key to start the operation.
The Y bar moves to the highest position and the table moves to the
back.
The wiper moves to the front, and the carriage moves to the
maintenance position.
6. Fill the cap with cleaning liquid using a drop-
per.
7. Press the [ENTER] key and set the waiting
time.
8. Press the JOG key [ ] or [ ] to set the expo-
sure time. (1 - 99 minutes)
Set the time to expose the head to the cleaning liquid during
capping.
9. Press the [ENTER] key to perform initialization.
Initialization is performed and the head is capped.
The progress of exposure is displayed.
10. Pressing the [END] key finishes the operation.
When the time set elapses, exposure finishes.
11. Perform the cleaning operation.
The progress of cleaning is displayed.
The device enters the LOCAL mode.
FUNCTION
MAINTENANCE
< ENT >
MAINTENANCE
Station
< ent >
Station Maint
Sel
: CarriageOut
Station Maint
Sel
: NozzleClean
Wiper Cleaning
Completed
: ent
Fill Up Washings
Completed
: ent
Nozzle Cleaning
WaitTimer
: 1 min
Initialize
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ − − − − − − − −
Waining
00:00:00