MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 28 / 218

- 1.8 -
Inside of rear face
Name Function
1. Screw for Absorption roller This screw secures the Absorption roller.
2. Feeding tension bar stopper Used to lead the fabric.
3. Antistatic brush Prevents dust and lint on the fabric, as well as static electricity.
4. Water absorption roller Removes water during belt cleaning.
5. Belt wiper unit Removes water during belt cleaning.
6. Brush roller Removes dirt of the belt. (Roller is located inside.)
Side face of main unit
Name Function
1. Heater indicator Indicates operating state of heater.
Lighting : The setting temperature has been reached.
Blinking : Temperature has not been reached to the setting value.
2. Heater voltage selector Used for setting of Heater power voltage.
3. Heater power switch Turns the power of the heater ON or OFF.
4. Heater power inlet Connects the power cable of the heater.
5. Cleaning liquid tank unit Pools water for cleaning the belt.
6. Sewer valve for The sewer valve for the cleaning liquid tank.
Cleaning tank water Supply the tank of water.
7. Electromagnetic valve Used for direct piping.
8. Cleaning water hose Used to supply cleaning water to this device.
2
3
4
1
1
2
3
4
6
5
5
7
8
6