MIMAKI Textile Jet Tx3-1600, Operation Manual

Page: 92 / 218

- 2.38 -
9. Press JOG keys [ ] and [ ] to correct the dot
position of pattern 1.
The seven test patterns that are output are sequentially named
[Pattern 1] to [Pattern 7].
Select the correct dot positions on Pattern 1 using the JOG keys
[ ] and [ ].
Select the dot positions that make a straight line on the test pattern
in the two printing directions.
• If the pattern correction value for straight
lines is not within -15 t15, adjust
the head height and then correct it again
with [PrintAdjust].
• The dot position enables to correct again
after entering the correction value once.
9. Press [ENTER] key.
10. Repeat Steps 8 and 9 to correct the dot posi-
tions on Patterns 2 to 7.
Select the correct dot positions on each of the patterns.
11. Press [END] key twice, and the menu returns to
the LOCAL mode.
PrintAdjust
Pattern2
= 0 . 0
PrintAdjust
Pattern3
= 0 . 0
PrintAdjust
Pattern4
= 0 . 0
PrintAdjust
Pattern5
= 0 . 0
PrintAdjust
Pattern6
= 0 . 0
PrintAdjust
Pattern7
= 0 . 0
<< LOCAL >>
w i d t h : 1 6 2 0 m m
MAINTENANCE
PrintAdjust
< ent >
PrintAdjust
Print
: ent
Select the dot position -2
that make a straight line on
the test pattern in the two plotting direction.
PrintAdjust
Pattern1
= 0.0